AC Infinity Air Filter Set AI+ PRO 100 mm, Inline Duct Fan With AI+ Controller and Activated Charcoal Filter

Code: AC-FKT4
Not rated
7 999 Kč 6 610,74 Kč excl. VAT Measure price:
In stock
Delivery to:
25/11/2026
AC Infinity Air Filter Set AI+ PRO 100mm, Inline Duct Fan With AI+ Controller and Activated Charcoal Filter filters air in grow spaces, delivering 348 m³/h.

Detailed information

Product detailed description

Smart 100 mm ventilation with AI control

The AC Infinity Air Filter Set AI+ PRO combines a duct fan, carbon filter and CONTROLLER AI+ for ventilation in smaller grow spaces or a propagation tent. The controller monitors temperature, humidity and VPD, then adjusts the fan speed smoothly to match conditions. It also learns from previous results to avoid over- or under-correcting.

Connect the controller to the AC Infinity app over Wi-Fi or Bluetooth for remote access, AI presets, grow guides, instructions and chatbot support. The spare controller ports also let you connect additional UIS devices later.

What is included

  • 1 × CLOUDLINE PRO S4 inline duct fan
  • 1 × CONTROLLER AI+
  • 1 × 100 mm carbon filter
  • 1 × 100 mm flexible four-layer ducting, 7.6 m
  • 1 × pack of 2 pre-filter fabric covers for the 100 mm carbon filter
  • 1 × pack of 2 stainless steel duct clamps, 100 mm
  • 1 × set of adjustable rope hangers, 2 pairs
  • 2 × hanging straps
  • 1 × male-to-male UIS cable, 3.05 m
  • 6 × cable holders
  • 1 × self-adhesive pads for cable ties
  • 4 × hook-and-loop straps
  • 4 × wall plugs
  • 4 × fan mounting screws

Fan and controller specifications

  • Kit model: AC-FKT4
  • Fan: CLOUDLINE PRO S4, model AI-CLS4, 100 mm diameter
  • Airflow: 348 m³/h
  • Noise level: 28 dBA
  • Static pressure: 223 Pa
  • Voltage: 100-240 V AC, 50/60 Hz, EU plug (type C/F)
  • Power consumption: 28 W maximum / 21 W average; current: 0.4 A
  • Ingress protection: IP44
  • Bearings: dual ball; L10 lifespan: 67,000 hours
  • Mounting: horizontal or vertical
  • Fan dimensions: 188 x 303 x 176 mm
  • Fan cables: 3.05 m to the controller; 2.44 m power cable
  • Operating conditions: 0 to 60 °C, 35 to 85% RH
  • CONTROLLER AI+: connects directly to up to 8 devices, or 32 with splitters; devices connected to one port share a programme

Carbon filter and ducting

The carbon filter has a 100 mm opening and measures 300 x 177 mm overall. Its reversible aluminium flanges are 3.7 cm long, and the filter has a galvanised steel mesh with a gunmetal finish. The 38 mm layer of Australian RC412 activated carbon has a 1200+ IAV rating, and the filter’s maximum airflow is approximately 357 m³/h. The pre-filter and reversible flanges let you turn the carbon layer around and extend the filter’s lifespan.

The 100 mm ducting is 7.6 m long, with an outer PVC layer, an inner aluminium foil layer and a steel spiral reinforcement.

PWM/EC motor and quieter operation

Unlike the fan in the basic kit, the CLOUDLINE PRO uses a PWM-controlled EC motor. It runs quietly even at low speeds.

Choosing the 100 mm variant

The 100 mm option is the smallest in the Air Filter Set AI+ PRO range. It suits smaller grow spaces or propagation tents where app-based control is also wanted. For a larger tent, choose the 150 mm AI+ PRO set. If smart control is not needed, the 100 mm Air Filtration Kit offers the same diameter with a wired speed controller.

The CLOUDLINE A, S or T guide explains how to choose an extract diameter for your tent size. For a closer look at the controller, see the CONTROLLER AI+ and 69 PRO comparison.

Related components

Additional parameters

Category: AC Infinity Ventilation Kits
EAN: 819137022911
Flange (mm): 100

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů