Fans
Product sorting
List of products
Oscillating Fan with clip Urban OscilFan, 24 cm, 20w, 2 speeds clips onto grow tent poles of any width and can be mounted horizontally or vertically.
Floor fan Cyclone 20 cm, 3 speeds provides adjustable airflow for grow spaces. Its quiet motor offers three speed settings, and the lightweight unit weighs 1.25 kg.
Clip-on fan PF 15 cm 15 W 2 speeds circulates air around plants and clips securely in place for vertical or horizontal mounting in a grow tent or room.
Clip-on fan RAM 15 cm 15 W 2 speeds keeps air moving around plants. Its sturdy clip supports vertical or horizontal mounting, with airflow up to 200 m³/h.
Garden Highpro VKO 100, axial fan 107 m3/h with cable suits smaller spaces and short ventilation ducting with low pressure loss. It can be mounted vertically or horizontally.
Garden High PRO - PROFAN TT 100 mm, 145-200 m3/h, 2 speeds offers two airflow settings, with a maximum airflow of 187 m3/h. Its 100% copper motor supports continuous operation.
Clip-on fan Garden Highpro Clip Fan 15CM / 5W circulates air in enclosed spaces. Its 5 W magnetic motor reaches 2100 rpm and moves up to 215 m3/h.
AIRFAN THERMO Foam Box Fan 2500 m3/h (FMB90013) uses an insulating polypropylene casing to reduce vibration and operating noise, with connection to circular air ducts.
AIRFAN ISO-Box Steel Fan 2500 m3/h (9-9-9001/3) is a compact, insulated centrifugal fan for circular duct connections, with a rated airflow of 2500 m3/h.
AIRFAN ISO-Box MDF Fan 1500 m3/h (7-7-1400) combines a Torin-Sifan centrifugal motor with an insulated MDF enclosure for quieter ventilation. Power consumption is 147 W.
GENT Clip Fan 5W, clip fan, 15 cm diameter, draws 5 W and delivers airflow up to 215 m³/h. It matches the performance of 15 W fans with lower power consumption.
Fan TT 125 Smart Dual, 220/280 m3/h - 2 speeds is a lightweight inline fan for duct extraction up to 17 m, with a 125 mm connection and two motor speeds.
Garden High PRO - PROFAN TT 150 mm, 405-520 m3/h, 2 speeds is a lightweight plastic inline fan with a 100% copper motor and low noise for continuous operation.
Garden High PRO - PROFAN TT 125 mm, 220-280 m3/h, 2 speeds is a lightweight plastic duct fan with a 100% copper motor, low noise and two settings for continuous operation.
Garden Highpro VKO 125, axial fan has a durable ABS plastic casing and suits short ventilation ducting with low pressure loss or direct extraction through a wall. Airflow: 190...
Clip-on fan Garden Highpro Clip Fan 15CM / 15W has a 100% copper motor and two speed settings. It can be clipped in horizontal or vertical positions.
How to choose a fan
Airflow (m³/h) in relation to the room volume and the duct diameter are key. The air in a tent should be replaced roughly every 1–3 minutes. Multiply the tent volume (width × depth × height in metres) by approximately 60 to get an indicative airflow requirement in m³/h.
| Diameter | Indicative airflow | Typical use |
|---|---|---|
| 125 mm | ~220–400 m³/h | Tent up to ~100×100 cm |
| 150–160 mm | ~400–800 m³/h | Larger tent / small room |
| 200–250 mm | ~800–1100 m³/h | Grow room |
If you connect a carbon filter after the fan, allow for extra airflow capacity (the filter creates resistance). It is worth controlling the fan speed with a controller. Also place a circulating fan inside the tent to maintain airflow between the plants.
What you’ll find in our fan range
- Intake/extract
- Circulating fans
- Clip fans
- Pedestal fans
- Floor fans
- Fan controllers
- Prima Klima fans
- Vents fans
Pair them with ventilation ducting, carbon filters and silencers.
Brands available
Over 500 products from brands such as Prima Klima, Ruck (Can-Fan), Systemair, RAM, Rhino, Vents, Torin and AC Infinity.
Frequently asked questions
What airflow rating do I need?
Start with the tent volume: multiply the width × depth × height in metres by approximately 60 to get an indicative airflow in m³/h for replacing the air every minute. Allow extra capacity if you connect a carbon filter after the fan, as it creates resistance and reduces airflow.
What is the difference between an extraction fan and a circulating fan?
An extraction (duct) fan removes warm, humid air from the tent and brings in fresh air — controlling temperature, humidity and odours. A circulating fan (clip or pedestal) does not exchange the air; it only moves it around inside, which strengthens stems and helps prevent mould. You need both.
Can I control the fan speed?
Yes. Fan speed can be controlled with a speed controller or a thermostat/controller according to temperature and humidity. Lower speeds mean less noise and power consumption; climate-based control is the most efficient option.
What fan diameter should I choose?
Match the diameter to the carbon filter and ducting — the most common sizes are 125, 150/160 or 200 mm. 125 mm is suitable for smaller tents, while 150–250 mm suits a larger tent or room. Using the same diameter throughout the system simplifies installation and reduces losses.
Most items are in stock and dispatched as quickly as possible. If you have a question, contact us or visit our physical shop.
