LED Lighting
- 720 W LED lighting
- Controls
- TLED
- AC Infinity
- Maxibright
- SANlight
- SunPro
- Lazerlite
- Lumatek
- ThinkGrow
- Trafika
- Vanguard
- ViparSpectra LED grow lights
- Mars Hydro
- LED bars
- LED Without Light Source
- Boards and UFOs
- Supplemental LED Lighting
- For Seed Starting
- Other LED Lights
- Additional LEDs
- FAVEN LED Lighting
- VIVOSUN
Product sorting
List of products
Faven CX2 CONTROLLER EU controls Faven Chroma lighting, with two independent channels for separate lighting groups and spectrum adjustment from R4–R9.
GENT G-LED 26W Linkable, for growth 6500K provides a growth spectrum for cuttings and seedlings, with 26 W power and the option to connect up to 10 lights in series.
Secret Jardin Cosmorrow LED 20W Full Spectrum 2.85 µmol/J is 47 cm long and suits the entire growing cycle, including cuttings, vegetative growth and flowering.
GENT G-LED power cable for G-LED 26/42W Linkable, 2 m is a 2 m cable for GENT G-LED 42W Linkable lights. It is intended exclusively for GENT G-LED 26/42W Linkable fittings.
Vanguard Hydroponics COSMOS LED Board 45W provides full-spectrum lighting for vegetative growth and flowering, with selectable spectra and an efficiency of 2.5 µmol/J.
LED bulb SunPro PAR38 - 15W/2700K is suited to small plants in the flowering phase, producing very little heat and offering a 20,000-hour lifespan with a 35° beam.
GENT G-LED 26W - growth spectrum provides white-blue lighting for plants during growth, with a 6500 K colour temperature for a 24x50 cm growing area.
Secret Jardin Cosmorrow® 1x 20W - Power supply with accessories powers and suspends one Cosmorrow® light; the 24 V, 20 W set suits low grow spaces.
TLED SunPro Bloom 26W - flower suits small grow spaces up to 0.8 m². Its low heat output allows placement directly above plants without scorching them.
How to choose an LED grow light
Efficiency (µmol/J), power consumption relative to the area and spectrum are the key factors. Modern, high-quality panels typically achieve around 2.5–3.0 µmol/J — the higher the figure, the more light you get from each watt.
| Area | Approximate LED power consumption | Type |
|---|---|---|
| 60×60 cm | ~100–150 W | Board / quantum board |
| 80×80 cm | ~150–250 W | Board or bar system |
| 100×100 cm and above | ~250–400 W+ | LED bars (even coverage) |
Compared with HPS, LED offers higher efficiency and a lower heat load, making it easier to maintain the temperature in a tent. Its higher purchase price is offset by lower consumption. Weaker panels or bars are sufficient for supplemental lighting or raising young plants.
What you’ll find in our LED lighting range
- LED bars
- LED Boards and UFOs
- LED lights with E27 fittings
- LED lights without a power supply
- LED lights for raising young plants
- Supplemental LED lighting
- SANlight LED
- Lumatek LED grow lights.
LED lights are suitable for a grow tent; check the intensity with metres (lux metre/PAR).
Brands available
Over 500 LED lights from brands such as SANlight, Lumatek, Secret Jardin, Dimlux, Lumii, Mars Hydro, ViparSpectra, AC Infinity and HortiONE.
Frequently asked questions
How many watts of LED do I need for 60×60 cm?
A quality LED panel of around 100–150 W is usually sufficient for an area of 60×60 cm. The exact power depends on the light’s efficiency (µmol/J) and the growth stage — flowering requires higher intensity than growth. Always follow the manufacturer’s recommended coverage area, not just the wattage.
Is LED better than an HPS discharge lamp?
LED has higher efficiency (µmol/J), produces less heat and lasts longer, making it easier to maintain the climate in a tent and reducing consumption. HPS has a lower purchase price and a proven spectrum for flowering. Most growers now choose LED because of its running costs and lower heat load.
What does µmol/J mean?
µmol/J (micromoles per joule) indicates light efficiency — how many usable photons (PPF) are emitted per watt of power consumption. The higher the figure, the more light you get from each watt. Modern, high-quality LEDs typically achieve around 2.5–3.0 µmol/J.
Do I need to hang an LED higher than a discharge lamp?
Usually, yes. Powerful LED panels have high intensity at close range and can cause leaf bleaching if hung too low. Follow the manufacturer’s recommended hanging height and raise the light during the initial adjustment period.
We have most products in stock and dispatch them as quickly as possible. If you have a question, contact us or visit our brick-and-mortar shop.
