Controls and regulation devices automatically manage your growing environment — lighting, ventilation, temperature, humidity and CO₂ dosing — without your constant presence. At GrowCity, you’ll find timers, speed controllers, distribution boards and smart controllers from brands such as Trolmaster, GSE and SMSCOM.
Digital timer ZSD16 for increased inductive load runs up to 10 programmes across 16 day combinations, switches up to 3,500 W and keeps time for over 100 hours off mains.
Urban Mechanical Timer Socket, mechanical timer, automates lighting, heaters or ventilation with up to 96 switching cycles per day and 15-minute intervals.
VIVOSUN Smart Air Filtration Kit Pro 200 mm, 1414 m3/h (AeroZesh T8 fan, E42AP WiFi Controller, odour filter, ventilation ducting) delivers up to 1414 m3/h.
Urban Digital Timer Socket, digital timer lets you programme switching across a weekly cycle. It handles loads up to 16 A, with a starting current of up to 2 A.
GAS cable Active Male/Male for EC fans, 5 m is an active male-to-male cable for connecting a GAS active control unit to Rhino Ultra EC Fan and V2 EC Vector EC fans.
GSE Digital temperature, humidity, negative pressure and minimum fan speed controller 2x5A manages up to two fans and keeps temperatures and humidity steady, with speeds held...
GSE Digital Humidification/Dehumidification Controller 10A (Hygrostat) maintains room humidity automatically, with settings from 30% to 100% and adjustable hysteresis.
GSE Digital Temperature and Minimum Extract Speed Controller adjusts an extract fan to hold the set temperature, with minimum speed adjustable from 20% to 100%.
T-junction Control Link Cable LED Lumatek connects and controls multiple Lumatek Zeus LED lights through the Lumatek Digital Panel Plus, with 3 LLT M12 connectors.
VIVOSUN GrowHub Outlet Controller A22, temperature and humidity sensor, compatible with Vivosun App offers two EU sockets and app-based control, with a total rating of 15 A.
Trolmaster 6 Inch Poly Air Sock 15.2 cm, 1 m (PS-6) distributes air evenly above the canopy through precisely positioned openings, helping maintain consistent airflow throughout...
VIVOSUN SGS Convertor links compatible EC fans with MOLEX or AUX connectors to GrowHub controllers, enabling speed control, schedules and remote operation via the VIVOSUN app.
VIVOSUN Temperature & Humidity Sensor Probe, waterproof probe for GrowHub Controller E42/E42A, AeroLab THB1/THB1S, 3.66 m is waterproof and measures temperature to +/-0.5 °C.
VIVOSUN USB-C Splitter 1× Male / 2× Female, splitter adapter for GrowHub E42A connects two compatible devices through one USB-C port and supports daisy-chain connection.
TechGrow Humi Heavy humidistat controls a humidifier or dehumidifier, with adjustable humidity from 10% to 90%. Settings are retained during a power cut.
TechGrow Humi Twin humidistat (humidification or dehumidification) controls a humidifier or dehumidifier, with adjustable humidity from 10% to 90% and settings retained after a...
TechGrow Clima Micro Plus 5A controller (minimum speeds) manages a fan’s minimum speed to regulate room temperature, with a setpoint range of 15°C to 35°C.
Trolmaster 6 Inch Poly Air Sock 15.2 cm, ROLE 122 m (PS-6) distributes air evenly above the crop; openings are spaced 41.9 cm apart to support consistent airflow throughout the...
GAS Cross-Connect Adaptor for AC Infinity and TrolMaster Controllers links compatible G.A.S EC fans to either control system. AC Infinity use requires a Type A 0–10/PWM adaptor.
Trolmaster Green-X Controller with 4-in-1 Sensor (Temp / Humid / CO2 / Light ) & Cable set (GCS-1) manages greenhouse systems with up to 96 planned irrigation outputs.
CO2 MOTHER NATURE replacement refill replenishes the CO2 generator in 5 L or 10 L sizes. The 5 L variant suits grow tents up to approximately 120x120 cm.
CO2 MOTHER NATURE replacement refill replenishes the CO2 generator in 5 L or 10 L sizes. The 5 L variant suits grow tents up to approximately 120x120 cm.
Trolmaster Smart Junction Box, for protecting lights in a chain against overload monitors current continuously in ThinkGrow LED Daisy Chain circuits and disconnects power if it...
SMSCOM SPC, 7A - speed controller with thermostat scans the grow room for about 5 minutes, then maintains the set temperature to +/-1 °C with intake and extract fans.
Neptune CO2 controller – temperature, humidity and CO2 control measures CO2 from 0–2,000 ppm with an NDIR sensor, LCD readout and a photocell that switches it off when lights go...
GSE Timer Box IV 8x600W + heaters 4x600W controls eight 600 W HID lamps and four 600 W heaters, with a 48-segment display, 0–10 V or PWM output and IP54 protection.
GSE Timer Box IV 4x 600 W + heaters 2x 300 W switches HID lamps and heating, with a 48-segment display, 0–10 V or PWM output, temperature monitoring and IP54 protection.
GSE Timer Box II 8x600 W + 1x2000 W, 220 V switches eight 600 W HID lamps and one heater circuit rated up to 2,000 W. Its 24-hour timer has 30-minute settings and a 36-hour...
GSE Temperature Step transformer 8A, for 2 fans controls intake and extract fans in six temperature steps, with a 4 m sensor cable and IP54 protection.
GSE Step transformer 2.5A, for 1 fan regulates the temperature range using two dials and reduces start-up noise. It has a waterproof surface and a 4 m sensor cable.
GSE Humidity and Temp. Step transformer 8A (1 fan) controls one fan in 6 steps according to temperature and humidity. Its 4 m sensor cable extends to 50 m; IP54 protection.
GSE EC humidity, temperature and min. speed controller regulates one EC fan by temperature and humidity, with 20–30 °C and 30–100% ranges, 4 m sensor cables and IP20 protection.
Cornwall mechanical plug-in timer automates regular switching of electrical appliances, with adjustable intervals from 15 minutes to 24 hours and a maximum resistive load of...
VIVOSUN GrowHub E25 - Basic WiFi Flash Controller connects one Smart Grow System device to app control, with Type-C plug-and-play setup, 3 W power consumption and WiFi...
VIVOSUN GrowHub Controller E42 - intelligent WiFi controller manages grow lights and fans separately, with a 4" display, built-in temperature and humidity sensor, and app control.
ProLeaf CO2 controller regulates CO2 using an integrated sensor and light sensor, controlling the measured concentration across a range of 400–2,000 PPM.
Digital timer Cornwall for increased inductive load, SCHUKO socket runs weekly schedules with 1-minute switching intervals, a battery backup lasting at least 100 hours and a...
CO2 SuperPro - analogue CO2 controller maintains a set CO2 level in a greenhouse or grow room, with control up to 2,500 PPM and daytime dosing via its built-in photosensor.
AC Infinity CO2 + Light Sensor for Controller AI+ monitors CO2 from 0 to 40,000 ppm and detects whether lights are on or off. It connects to the controller via a 3.66 m cable.
Trolmaster Substrate Sensor Set (VWC, EC & Temp) (WCS-9) measures substrate water content, EC and temperature across multiple points, with a temperature range of 0–50 °C.
Trolmaster Substrate Sensor Node (VWC, EC & Temp) (WN-9) monitors moisture, EC and temperature in the root zone, with ranges of 0–100% water content and 0–30 mS/cm EC.
Choose according to what you want to automate. Options range from simple timers for lights to advanced controllers that manage the entire grow tent according to temperature and humidity.
Over 230 products from brands such as Trolmaster, GSE, SMSCOM, Malapa and Lumatek.
Frequently asked questions
What should I automate first?
Lighting with timers and extract fan speed according to temperature/humidity — this lets you keep an eye on the two most important conditions in the grow tent.
When is a Trolmaster controller useful?
When you want to control several elements (light, ventilation, CO₂, humidity) from one place and using sensors. Suitable for larger or more demanding growing spaces.
How can I control a fan according to the environment?
Use a fan controller with a thermostat/humidistat — it automatically increases the speed when the temperature or humidity rises.
We have most products in stock and dispatch them as quickly as possible. If you have a question, contact us, or visit our physical shop.