Water Distribution

Water distribution delivers watering to every plant — from PE hoses and drip emitters (drip) to couplings, reducers and valves, as well as complete capillary irrigation systems. A properly assembled system automates watering and saves work. Here you'll find components in 16, 20 and 25 mm diameters from brands such as Irritec and AutoPot.

Bestsellers

Capillary CNL 4-6 mm in a roll (1 m)
In stock
Code: PAKAPROLL-NE
 
14 Kč
Autopot 16 mm hose - 1 m
In stock
Code: AP-PIPE/1M
Was: 75 Kč  (–21 %)
59 Kč

Product sorting

272 items total

List of products

51936 xxx kapilara cnl 4 6 mm v roli 1 m
14 Kč

Capillary CNL 4-6 mm in a roll (1 m) distributes nutrient solution. Each length is cut from a 100-metre roll, so you can choose the amount you need.

Code: PAKAPROLL-NE
51687 netafim set pcj lncl kapkovac 3 l h 70cm hadicka jehla
15 Kč

Netafim Set PCJ LNCL dripper 3 l/h, 70 cm tube + needle provides pressure-compensated irrigation for pots and greenhouses. Flow rate: 3 l/h.

Code: N43989
2022 06 22 11 55 32 Autopot Blue Pipe 9mm 800x.jpg (800×800)
75 Kč –21 %
59 Kč

Autopot 16 mm hose - 1 m is flexible blue tubing for the main run from the reservoir to the system. Cut it to length and connect 6 mm or 9 mm branches using reducers.

Code: AP-PIPE/1M
38391 2 kapilara cnl 5 mm v roli 1m
10 Kč

Capillary CNL 5 mm on a roll (1 m) distributes nutrient solution to the plant. Cut from a 500 m roll, it suits irrigation layouts for indoor and outdoor growing.

Code: PAKAPROLL
paska hadice
39 Kč –25 %
29 Kč

Aquaking Hose clamp 16-25 mm (3/4") secures connectors on 16 mm and 20 mm PE hoses. The listed 20 mm PE hose is rated at 16 atm and measures 1 m.

Code: 21931
16925 1 f2736full
119 Kč

Yellow flexible hose diameter 19 mm (3/4") routes water from a pump to a hydroponic system. Its reinforced PVC construction resists kinking across -20 °C to +100 °C.

Code: KINGFLEX34
33150 netafim pe hadice cernobila 20 mm pn4 uv
35 Kč

Netafim PE hoses, black-and-white, 20 mm PN4 UV are LDPE irrigation hoses for greenhouses. The black inner layer prevents algae, while the white outer layer reflects UV and...

Code: N44023
989958ba
10 Kč

Netafim microtube SSPE 5 x 3 grey BL, 70 cm has a two-layer polyethylene construction for irrigation and water delivery, with a light grey outer layer and black inner layer.

Code: N54149
46890 netafim netbow zavlazovaci krouzek 25cm
79 Kč

Netafim Netbow irrigation ring 25 cm distributes water through multiple outlets and resists clogging. It suits containers holding 10–60 litres and connects to 5 mm capillary...

Code: N50551
46887 netafim netbow zavlazovaci krouzek 12cm
59 Kč

Netafim Netbow irrigation ring 12 cm distributes water through 8 or 4 drip outputs and resists clogging, with compatibility for containers holding 10–60 litres.

Code: N50550
33126 netafim kapkovac pcj lcnl 4 0 l h
14 Kč

Netafim dripper PCJ LCNL 4.0 l/h provides a steady 4 l/h flow for automatic irrigation, with a check valve for use in grow rooms, greenhouses and gardens.

Code: N43980
Spojka PE hadice typ T, 16mm, nástrčná Cover
19 Kč –21 %
15 Kč

T-spoj pro hadici 16 mm, plast (T-spoj 16 mm, plast) je důležitým prvkem pro spojení hadice o průměru 16 mm. Tento výrobek je vyroben z odolného plastu a je vhodný pro různé...

Code: ZAVL16SPOJT
51567 connecto spojka vnitrni zavit 20 mm x 3 4
39 Kč

CONNECTO female-thread connector, 20 mm x 3/4″. The internal thread defines its connection type, while the dimensions identify the fitting size for selection.

Code: N53382
Irritec PE přípoj hadice 20 mm x  3/4 “, vnější závit Cover Code: BX-PEHCO2007
49113 connecto spojka vnejsi zavit 20 mm x 3 4
39 Kč

CONNECTO male threaded connector 20 mm x 3/4″ has a 20 mm connection and a 3/4″ external thread, for joining compatible threaded parts.

Code: N51082
37205 1 regulacni pe ventil prubezny 16x16 mm
34 Kč –44 %
19 Kč

Regulating PE inline valve 16x16 mm is made for irrigation lines. Its 16x16 mm connections provide an inline fit for regulating water flow.

Code: N44151
Irritec PE přípoj 2-dílný 16x 1/2 “, vnitřní závit Cover Code: BX-PE2P2511
Spojka pro PE hadice, průměr 16mm Cover
19 Kč

PE hose connector type I, 16 mm, push-fit joins PE hoses with a 16 mm diameter, providing a direct connection between hose sections of the same size.

Code: PEI16
15221 spojka pe hadice ventil 20 mm sverny
129 Kč

PE Hose Connector Valve, 20 mm, Compression controls water flow in irrigation hoses. Its Easy system and plastic nut simplify installation and help secure the hose.

Code: EAVENT20
Spojka pro zpětný ventil 20mm-16atm. Cover
39 Kč

Connector for PE hoses for non-return valve, 20 mm, compression joins a PE hose directly to a water system through its external thread. Use it to connect a non-return valve.

Code: 1443
Spojka PE hadice typ zátka, 20mm, svěrná Cover
40 Kč –22 %
31 Kč

PE hose connector, plug type, 20 mm, compression-fit. Use this plug connector to close pressurised water systems and seal the end of a PE hose line.

Code: 1441
Spojka PE hadice typ I, 20mm, svěrná Cover
40 Kč –22 %
31 Kč

PE Hose Connector Type I, 20 mm, Compression joins or connects a distribution hose. Use it to link sections of a distribution line with a Type I fitting.

Code: 1438
99388185 8aa9 48a1 bae9 85f6d6e88047
75 Kč –34 %
49 Kč

Connector for water filter, 20 mm, compression is an Irritec fitting for inline filters, 20 mm PE distribution hose and 20 mm flexible irrigation hose.

Code: 1437
36485 fld filtr 120 micronu 3 4 zavit
249 Kč

FLD filter, 120 microns, 3/4´´ thread catches fine particles in irrigation water. Suited to small garden systems supplied by a well, with a 120-micron mesh.

Code: N44139
3074 zatka pe hadice 20 mm nastrcna
21 Kč –9 %
19 Kč

PE hose end cap, 20 mm, push-fit closes a PE hose end. Its 20 mm size and push-fit fitting specify the hose connection this cap is made for.

Code: FT203
2814 spojka pe hadice typ t 20 mm sverna
59 Kč

PE hose connector type T, 20 mm, compression splits an irrigation system into multiple branches. Use it to create a T-junction where the watering line needs to divide.

Code: 1440
61215 5795b927
99 Kč

CONNECTO T - T-piece with internal thread on branch 25x1" x 25 mm connects PE-LD and PE-MD pipework; a green mechanical fitting for joining pipes.

Code: N57362
59640 ae3f16ea
53 Kč

CONNECTO external-thread connector, 20 mm x 1/2″, for irrigation systems. Connect a 20 mm hose to check valves, water filters and other equipment using its external thread.

Code: N57063
59847 f554fde1
419 Kč

FLD filter, 155 microns, 1″ thread captures fine mechanical impurities from irrigation water for small garden systems. Maximum flow rate: 1,500 litres per hour.

Code: BX-FLD75
37883 super pal bila ldpe hadice 20 mm pn6
1 490 Kč

Super Pal white LDPE hoses 20 mm PN6 distribute nutrient solution in hydroponic irrigation systems. Their flexible construction supports installation in growing areas, with a 20...

Code: N44142
37883 super pal bila ldpe hadice 20 mm pn6
19 Kč

Super Pal white LDPE hoses 20 mm PN6 distribute nutrient solution in hydroponic irrigation systems. Their flexible construction supports installation in growing areas, with a 20...

Code: N44141
2818 f2736full
129 Kč

Yellow Flexi hose, diameter 25 mm (1") carries water from a pump to a hydroponic system. Its 3.5 mm wall resists kinking, and flexibility is retained from -20 to +100 °C.

Code: 1444
52899 5829b40b
49 Kč

Manifold splitter connector 16 mm 5x 4 mm connects capillary tubing to drip irrigation and Wilma systems, with five 4 mm outputs for distributing water.

Code: N54625
52896 manifold rozbocovac konektor 16 mm 4x 4 mm
49 Kč

Manifold splitter connector 16 mm 4 x 4 mm has four 4 mm outputs for capillary tubing, making it suitable for drip irrigation and Wilma systems.

Code: N54628
24367 3 tlakovy ventil ceta s kompenzaci tlaku a vyvodem
15 Kč

Pressure valve CETA with pressure compensation and outlet delivers water to individual plants and groups in pots, greenhouses or terraces. Flow rate: 2–8 l/h.

Code: 24367/8L
24367 4 tlakovy ventil ceta s kompenzaci tlaku a vyvodem
15 Kč

Pressure valve CETA with pressure compensation and outlet delivers water to individual plants and groups in pots, greenhouses or terraces. Flow rate: 2–8 l/h.

Code: 24367/4L
24367 5 ceta pc2 iph barb 4
16 Kč

Pressure valve CETA with pressure compensation and outlet delivers water to individual plants and groups in pots, greenhouses or terraces. Flow rate: 2–8 l/h.

Code: 24367/2L
33156 netafim pe hadice cernobila 25 mm pn4 uv
3 127 Kč

Netafim PE hoses, black and white, 25 mm PN4 UV suit greenhouse irrigation. The black inner layer prevents algae, while the white outer layer reflects UV radiation and reduces...

Code: N43986
33150 netafim pe hadice cernobila 20 mm pn4 uv
1 699 Kč

Netafim PE hoses, black-and-white, 20 mm PN4 UV are LDPE irrigation hoses for greenhouses. The black inner layer prevents algae, while the white outer layer reflects UV and...

Code: N43985
30013 nahradni filtrove vlozky pro filtry fld inox
199 Kč

Replacement filter cartridge INOX, O46 mm, length 148 mm fits FLD filters and offers filtration grades from 50 to 200 mesh, with 200 mesh suitable for misting systems.

Code: INOX/100
15041 f2736full
73 Kč

Yellow Flexi hose diameter 12.5 mm (1/2") carries water from a pump to hydroponic systems. Its flexible, reinforced PVC construction works from -20 to +100 °C.

Code: KINGFLEX12
35054 icetube bila flexi hadice prumer 4 6 mm
27 Kč

Icetube white Flexi hose, 4/6 mm diameter, uses a double wall to keep nutrient solution cooler. Its white outer layer reflects heat, while the black inner layer blocks UV and...

Code: N43586
33144 netafim pe hadice cernobila 16 mm pn4 uv
2 615 Kč

Netafim PE hoses black-and-white, 16 mm PN4 UV are suited to greenhouse irrigation. The black inner layer prevents algae, while the white outer layer reflects UV and reduces...

Code: N43984
34536 bimex hadice pe 16x1 8 mm
1 519 Kč

Bimex Hoses PE, 16x1.8 mm are PE hoses. The 16 x 1.8 mm dimensions make the hose size clear when identifying this product in a growing equipment range.

Code: N40464
34536 bimex hadice pe 16x1 8 mm
3 499 Kč

Bimex Hoses PE, 16x1.8 mm are PE hoses. The 16 x 1.8 mm dimensions make the hose size clear when identifying this product in a growing equipment range.

Code: N43582
16925 1 f2736full
4 990 Kč

Yellow flexible hose diameter 19 mm (3/4") routes water from a pump to a hydroponic system. Its reinforced PVC construction resists kinking across -20 °C to +100 °C.

Code: KINGFLEX34/25
15041 f2736full
1 490 Kč

Yellow Flexi hose diameter 12.5 mm (1/2") carries water from a pump to hydroponic systems. Its flexible, reinforced PVC construction works from -20 to +100 °C.

Code: KINGFLEX12/25

Listing controls

272 items total
Top

How to assemble a water distribution system

The starting point is a main PE hose (16/20/25 mm), with water delivered to the plants through branches and drip emitters. You will also need couplings, reducers, valves and caps.

  • Main hose: choose the diameter according to the number of plants and the length of the route.
  • Drip emitters (drip): deliver water evenly, directly to the roots.
  • Couplings and valves: for branching, shut-off and reducing between diameters.

Connect the system to a irrigation timer and pump for fully automated watering.

What you'll find in our water distribution range

Related categories include micro-capillary irrigation systems, NETAFIM pressure irrigation and pumps.

Brands available from us

Over 330 products — hoses, drip emitters, couplings and valves from brands such as Irritec and AutoPot.

Frequently asked questions

What hose diameter should I choose for a water distribution system?

Choose the diameter of the main PE hose according to the number of plants and the length of the route — the most common sizes are 16, 20 and 25 mm. Longer routes and more outlets require a larger diameter to ensure sufficient pressure and flow all the way to the end of the system.

How does a drip irrigation system work?

Thin capillary tubes with drip emitters run from the main hose directly to the roots of individual plants. Water drips evenly and precisely, without waste or wetting the leaves. Combined with a timer and pump, the system provides fully automated watering.

Most items are in stock and dispatched as quickly as possible. If you have a question, contact us or visit our physical shop.