AC Infinity CLOUDLINE PRO S4, Quiet Inline Fan System with Speed Controller, 100 mm

Code: AI-CLS4
Not rated
2 899 Kč 2 395,87 Kč excl. VAT Measure price:
In stock
Delivery to:
25/11/2026
AC Infinity CLOUDLINE PRO S4, Quiet Inline Fan System with Speed Controller, 100 mm moves 348 m³/h through 100 mm ducting at 28 dBA, with a 10-speed wired controller.

Detailed information

Product detailed description

Higher airflow for 100 mm ducting

AC Infinity CLOUDLINE PRO S4 is an inline fan for 100 mm ducting, delivering an airflow of 348 m³/h. Compared with the A4, it moves more air at a lower noise level: 28 dBA versus 280 m³/h and 29 dBA. Both models come with the same type of wired controller; the difference is in airflow and noise.

Speed control and UIS connection

A 3.05 m cable connects the fan to the included 10-speed controller, so it can run independently without an app. The control cable is part of the UIS™ platform. Instead of the included controller, connect it directly to the UIS port on a smart controller, such as the Controller 69 Pro or AI+ (sold separately). The smart controller adds app control and adjusts fan speed according to temperature, humidity and VPD. CLOUDLINE is UIS-native and needs no adapter.

Motor, airflow and construction

The PWM-controlled EC motor runs smoothly at low speeds. Its mixed-flow design and stator blade produce a static pressure of 223 Pa, helping the fan overcome resistance from a filter and longer ducting. Double ball bearings have a lifespan of 67,000 hours. The fan can be mounted horizontally or vertically, and the motor housing can be detached for cleaning. IP44 protection guards against dust and water.

What is included

  • 1 × CLOUDLINE PRO S4 inline fan
  • 1 × speed controller
  • 2 × hose clamps
  • 2 × hanging straps
  • 1 × 3.05 m UIS male-to-male cable
  • 6 × cable holders
  • 1 × adhesive pad set for cable ties
  • 4 × hook-and-loop strips
  • 4 × wall plugs
  • 4 × screws for mounting the fan
  • 1 × wood screw set for mounting the controller on a wall
  • 2 × screws for the controller board

Ventilation system for 100 mm ducting

Choosing airflow for a grow tent

A carbon filter increases the required airflow by approximately 60% due to the resistance of the carbon, so allow for extra capacity when choosing a fan. With an airflow of 348 m³/h, S4 provides more capacity than A4 at 280 m³/h. After accounting for the filter, ducting and a 25% reserve, it covers a slightly larger tent volume than A4 with the same reserve. To estimate the required airflow, multiply the tent volume in m³ by 60, add the resistance from accessories, then add a 25% reserve.

Specifications

SpecificationValue
Connection diameterØ 100 mm
Airflow348 m³/h
Noise level28 dBA
Static pressure223 Pa
Maximum speed2800 rpm
MotorPWM-controlled EC motor, mixed-flow design
Speed settings10, with power switch
Power consumption21 W average, 28 W maximum
Current0.4 A
Voltage100–240 V AC
Protection ratingIP-44
BearingDouble ball bearing
MountingHorizontal or vertical
Fan dimensions188 × 303 × 176 mm
Controller dimensions69 × 35 × 14 mm
Cables3.05 m to the controller, 2.44 m power cable

What to watch out for

  • The carbon filter is not included. Select a filter separately if your ventilation setup requires one.
  • App control requires a separate smart controller. The included wired controller operates the fan on its own in 10 speed settings; connect the control cable to the UIS port on a 69 Pro or AI+ for app control and VPD-based speed adjustment.

Additional parameters

Category: AC Infinity Fans
EAN: 819137020290
Flange (mm): 100

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů