AC Infinity CLOUDRAY A6, Grow Tent Clip Fan 150 mm, EC motor, 10-Stage Dynamic Wind Modes and Fan Speeds
Code: AC-CCA6Related products
Product detailed description
Targeted air circulation inside the tent
The CLOUDRAY A6 is a 150 mm clip-on circulating fan for moving and mixing air inside a grow tent. Its screw-clamp metal mount attaches to a tent pole at the required height, and the fan head can be aimed manually at a fixed spot. Direct airflow towards a corner, a hot spot beneath a grow light or an area between plants that the main extract airflow does not reach.
This is a circulating fan, not an extract fan: it moves air around inside the tent rather than exchanging it with outdoor air.
Manual positioning
Set the airflow direction by rotating the mount through 90° and tilting the fan head through 55°. The fan stays at the selected angle until you reposition it. A compact metal clamp grips tent poles firmly, with a vice-style fastening mechanism. The airflow is aimed at one chosen spot or direction; the fan does not oscillate automatically.
Fan speeds and Dynamic Wind modes
Choose from 10 digitally adjustable fan speeds and 10 Dynamic Wind modes. These modes vary the strength of the airflow to simulate changing outdoor air movement. Controls are located on the fan itself.
EC motor and protection
The brushless EC motor has carbon steel gears and dual ball bearings. It operates at 31 dBA and has a lifespan of up to 67,000 hours. The motor can be mounted horizontally or vertically. IP-54 protection guards the fan against dust and splashing water, and the unit has ETL certification, number 5027708.
UIS platform control
The fan is part of the UIS™ platform. Connect its cable to the UIS port on a smart controller, such as the CONTROLLER AI+ or Controller 69 Pro, both sold separately. This adds control through the AC Infinity WiFi app, climate triggers, timers and advanced automation, alongside the manual controls on the fan.
Specifications
- Impeller diameter: 150 mm
- Maximum airflow: 553 m³/h
- Noise level: 31 dBA
- Static pressure: 25 Pa
- Power consumption: 7.5 W
- Current: 0.14 A
- Voltage: 100-240 V AC
- Protection rating: IP-54
- Bearings: Dual ball bearings
- Mounting: Horizontal or vertical
- Lifespan: 67,000 hours
- Mount rotation range: 90°
- Tilt angle: 55°, manual
- Fan speeds / wind modes: 10 / 10, without automatic oscillation
- Dimensions: 24.7 x 30.0 cm
- Cable length to plug: 2.44 m
Pack contents
- 1 × CLOUDRAY A6 circulating fan
- 1 × screw-clamp mount
- 1 × extension cable
- 4 × cable ties
- 1 × cable holders
Comparing fan options
- CLOUDRAY S6 has the same 150 mm diameter. Instead of manual positioning, it adds motorised automatic oscillation with 10 levels.
- CLOUDLINE A6 is an inline extract fan with the same diameter, used to exchange air. The CLOUDRAY A6 circulates the air already inside the tent.
- Connect the CLOUDRAY A6 to the UIS port on a Controller 69 Pro, sold separately, to control it through the AC Infinity WiFi app.
- CLOUDRAY A9 is the larger 225 mm variant for a larger tent.
The AC Infinity grow tent system guide explains how to combine extraction and circulation in a tent.
Positioning and coverage
The fan covers a 90° rotation range and a 55° tilt range from its mounting point, directing air towards one selected spot or direction. Coverage depends on tent size and plant layout. Larger tents are often fitted with several units at different heights or in different corners.
How the CLOUDRAY A6 differs from the CLOUDRAY S6
Both fans have a 150 mm diameter, 10 fan speeds and 10 Dynamic Wind modes. The A6 is adjusted manually through a 55° tilt and 90° rotation, then stays in a fixed position. The S6 also has motorised automatic oscillation with 10 levels.
Additional parameters
| Category: | Clip Fans (Clip fan) |
|---|---|
| EAN: | 819137022416 |
| Flange (mm): | 150 |
Discussion
Be the first who will post an article to this item!
