AC Infinity HYDRONE 5, plant dehumidifier with 10-level control
Code: AC-DHT5Related products
Product detailed description
Steady humidity control for grow tents
AC Infinity HYDRONE 5 removes moisture from the air in a grow tent, helping keep humidity under control during cultivation. Its ten output levels give you finer adjustment than simple on/off operation, which alternates between running and stopping and can cause humidity and VPD to fluctuate.
It can lower tent humidity to 50% or below, helping prevent mould late in the flowering phase. For this to work, the humidity in the room containing the tent must remain at or below 62%. Ventilate the room, for example by opening a window, or use a standard compressor dehumidifier there.
Control through the AC Infinity system
Connect HYDRONE 5 to a controller such as Controller 69 PRO or Controller AI+ using the built-in UIS™ port. The controller is not included. The unit itself offers on/off control and ten output levels; automatic humidity or VPD control requires a compatible controller. Connecting one also unlocks mobile app functions for managing the growing environment.
- Remote control over Wi-Fi
- Humidity and VPD (Vapour Pressure Deficit) automation
- AI-controlled climate management
- Data charts and history
- Alerts and notifications on your phone
- Restores the last setting after a power cut
Duct connections and condensate drainage
Two Ø 150 mm duct connections let you direct dry air from the outlet into the tent. The optional intake connection also supports operation in a closed air loop.
Condensate collects in the integrated 2 L tank. For continuous drainage by gravity, connect the included drain hose.
Temperature and VPD management
HYDRONE 5 generates heat during operation, somewhat more than a compressor dehumidifier, so it supplies warmer dry air to the tent. In a closed system, manage temperature actively with an extract fan, such as one from the CLOUDLINE series, to bring in cooler air when needed. Monitor tent temperature and lower it towards the end of flowering.
For best results, particularly during the flowering phase, control the dehumidifier in VPD mode. A slight temperature increase combined with lower humidity helps reach the appropriate VPD for healthy growth and a strong harvest.
Pack contents
- 1× HYDRONE 5 dehumidifier
- 1× drain hose
- 1× UIS extension cable, male-to-male
- 4× hook-and-loop straps
- 4× cable ties
The controller and ventilation ducting are not included.
Technical specifications
- Overall length: 24.2 cm
- Overall width: 26.0 cm
- Overall height: 39.8 cm
- Coverage: Grow tents up to 1 × 1 m
- Motor type: Rotary, PWM-controlled, 10 levels
- Actual dehumidification capacity: Up to 4 L under suitable conditions; not directly comparable with compressor performance
- Tank capacity: 2 L
- Duct connections: 2× 150 mm diameter
- Power consumption: 209–350 W
- Power supply: 230 V AC
- Frequency: 50 Hz
- UIS cable: 3.05 m
- Power cable: 2.44 m
Ducting for the connections is not included. Ventilation ducting is available separately.
Where HYDRONE 5 fits
This unit suits grow tents up to 1 × 1 m, fine adjustments to humidity and VPD, and use as part of an existing climate-control setup. It is not suited to unventilated rooms, setups with a large plant mass or dehumidifying an entire room.
For tents from 120 × 120 to 150 × 150 cm and a larger plant mass, see HYDRONE 7. The humidifier or dehumidifier guide explains when to manage humidity in either direction. For instructions on connecting HYDRONE to an AC Infinity system, see the AC Infinity grow tent system guide.
Discussion
Be the first who will post an article to this item!
