AC Infinity IONFRAME EVO8, Samsung LM301H EVO LED Grow Light, 730 W, 150x150 cm
Code: AC-IF8KRelated products
Product detailed description
LED lighting for a 150 × 150 cm grow tent
AC Infinity IONFRAME EVO8 is a square grow light measuring 112 × 113 cm, made for large grow spaces. It covers a 150 × 150 cm tent, such as the CLOUDLAB 866. At 730 W, it delivers a PPFD of 2,013 µmol/m²/s, giving an output-to-power ratio of approximately 2.76 PPFD/W. Within the IONFRAME EVO range, that is a higher ratio than the more powerful EVO10, at 2.76 compared with 2.15 PPFD/W.
Full spectrum from 2,688 LEDs
The light contains 2,688 LEDs, predominantly Samsung LM301H EVO diodes with an efficiency of 3.14 µmol/J per diode. Their calculated layout promotes even coverage and light penetration into the canopy while limiting hot spots. The mix comprises 1,720 EVO 3000 K LEDs, 864 EVO 5000 K LEDs, 88 OSRAM 660 nm red LEDs, 8 OSRAM 730 nm far-red LEDs and 8 Seoul 395 nm UV LEDs.
The driver is detachable. The steel-and-aluminium construction uses magnetic mounting, and the light has IP-65 protection and ETL certification (no. 5021417). IP-65 protection suits a humid grow tent, but the light is not waterproof.
Timer and UIS control
The included digital timer has a display, 10 brightness levels, gradual brightening and dimming at sunrise and sunset, and cyclic operation. It works independently, without an app. For Wi-Fi control, automation and grow recipes, connect the EVO8 to a UIS controller, such as the CONTROLLER AI+, sold separately. Larger installations can link up to 80 lights using splitters, such as the UIS Splitter Hub.
What is included
- 1 × IONFRAME EVO8 LED grow light
- 1 × LED driver
- 1 × driver cable
- 1 × digital timer with display
- 2 × driver brackets
- 2 × rope ratchets
- 2 × stainless steel wire hangers
- 1 × UIS cable, male-to-male, approx. 60 cm
- 1 × UIS cable, male-to-male, approx. 3 m
- 1 × set of cable ties
- 4 × hook-and-loop straps
- 6 × nylon screws
- 2 × timer mounting plate screws
- 3 × hex nuts
- 2 × wood screws for the timer
- 4 × wood screws for the driver
- 4 × driver bracket screws
Splitters for linking multiple lights are sold separately.
Technical specifications
| Specification | Value |
|---|---|
| Power consumption | 730 W |
| Coverage | 150 × 150 cm |
| PPFD | 2,013 µmol/m²/s |
| Efficiency | 3.14 µmol/J per diode |
| LEDs | 2,688: 1,720 EVO 3000 K, 864 EVO 5000 K, 88 OSRAM 660 nm, 8 OSRAM 730 nm, 8 Seoul 395 nm |
| Spectrum | 3000 K, 5000 K, 660 nm, 730 nm, 395 nm |
| LED driver | SOSEN-730W |
| Voltage | 100–277 V AC |
| Current draw | approx. 3.17 A (at 230 V) |
| Light dimensions | 112.0 × 113.0 × 8.6 cm |
| Driver dimensions | 18.2 × 4.0 cm |
| Timer | Digital with display, 8.4 × 3.0 × 1.8 cm, 10 brightness levels |
| Power cable | 243.8 cm |
| Protection rating | IP-65 (dustproof, protected against water jets) |
| Certification | ETL, Intertek no. 5021417 |
| Frequency | 50/60 Hz |
| Lifespan | 50,000 hours |
Choosing the right light for your tent
For a medium 120 × 120 cm tent, the IONFRAME EVO6 (500 W) is suitable. For greater light intensity across the same 150 × 150 cm footprint, choose the IONFRAME EVO10 (1000 W). It delivers 2,146 µmol/m²/s PPFD and uses two drivers.
The AC Infinity grow tent system guide explains how lighting, ventilation and a controller work together. The AC Infinity setups by tent size guide covers complete combinations for different tent sizes.
What to watch out for
- Splitters for linking multiple lights are not included and need to be purchased separately.
- The IP-65 rating protects the light against dust and water jets, but it is not waterproof.
Additional parameters
| Category: | AC Infinity LED Lighting |
|---|---|
| EAN: | 819137024076 |
Discussion
Be the first who will post an article to this item!
