AC Infinity THERMOFORGE S7, Plant Heater 1000 W with 10 Heating and Air Intake Levels
Code: AC-SFS7Related products
Product detailed description
Heating for a controlled grow space
The 1000 W THERMOFORGE S7 heats grow tents and other indoor growing areas up to approximately 3 × 3 m. Select one of 10 heating levels manually, or switch to fresh-air intake. The heater has no built-in sensor or automatic control: to maintain a target temperature or VPD, connect a UIS controller, which measures the climate with its own sensors.
Heat and airflow control
Individual PTC heating plates with PWM control provide 10 heat levels for consistent, energy-efficient heating. Switch between heating and fresh-air intake to adjust the conditions in the grow space.
Use the heater to warm the space when temperatures drop, or draw in fresh air to stabilise conditions. To cool the tent, the incoming air must be cooler than the air inside. This flexibility supports year-round growing of tomatoes, herbs and chillies.
Flexible installation with dual ports
The heater has separate ports for heat output and fresh-air intake. Its dual duct ports suit open-loop setups that exchange air with the surroundings, as well as closed systems that prioritise heating efficiency.
This modular design lets you adjust heat retention or air exchange to suit the grow space. Ducting is sold separately. Connect 2.44 m of heat-resistant ducting to the outlet; the intake is designed for 100 mm flexible, multi-layer ventilation ducting.
Safety features
Safety features include tip-over protection with an alert, flame-retardant materials, and overheat protection with automatic restart.
Connection to the UIS™ platform
Connect THERMOFORGE S7 to an AC Infinity UIS™ controller for automatic temperature or VPD control. With a Wi-Fi app connection, access advanced automation, real-time data monitoring, alerts and other grow-management functions.
Operating requirements
- For indoor use only.
- Use in a controlled environment with relative humidity between 30% and 65%. The same 30–65% RH range applies to incoming air.
- Do not use outdoors or in areas with high humidity.
- In closed-loop systems, do not use at the same time as an air humidifier; this could damage the heater.
- Connect only to an earthed socket with surge protection. Do not use extension leads.
- Do not connect other appliances to the same socket.
Included in the pack
- 1 × THERMOFORGE S7 heater
- 1 × UIS male-to-male extension cable
- 4 × cable ties
- 4 × hook-and-loop straps
Heat-resistant ventilation ducting is not included.
Technical specifications
| Specification | Value |
|---|---|
| Maximum power consumption | 1000 W |
| Voltage | 220–240 V AC |
| Growing area | up to approx. 3.0 × 3.0 m |
| Modes | heating, fan (fresh air) |
| Levels | 10 |
| Automatic control | by temperature or VPD via a compatible UIS controller |
| Air connections | 2 × Ø 100 mm |
| Dimensions | 22.0 × 17.8 × 25.4 cm |
| Power cable | 243.8 cm |
| Model | AC-SFS7 |
| Frequency | 50 Hz |
| Operating temperature | -10 to 60 °C |
| Operating humidity | 30–65% RH |
Choosing between S7 and T7
S7 suits growers who already have a UIS controller. The controller measures temperature and humidity with its own sensors, then S7 supplies heat according to the set programme. For automatic control without a separate controller, choose THERMOFORGE T7, which has its own controls and sensor.
Additional parameters
| Category: | Room Heating |
|---|---|
| EAN: | 819137025196 |
Discussion
Be the first who will post an article to this item!
