Aqua Master Tools H600 Pro (pH, EC, temperature)

Code: N48466
Not rated
3 999 Kč –0 %
h600pro
3 999 Kč –0 % 3 990 Kč 3 297,52 Kč excl. VAT Measure price:
In stock
Delivery to:
25/11/2026
Aqua Master Tools H600 Pro (pH, EC, temperature) measures pH, EC, TDS, PPM and temperature in liquids, with interchangeable probes and a 0.1–14.0 pH range.

Detailed information

Product detailed description

Aqua Master Tools H600 Pro is a handheld monitor for growers who need more than a pocket metre. It measures pH, EC, TDS, PPM and liquid temperature using separate, replaceable electrodes. The complete set travels in a sturdy case, making it suited to use by a tank or in the workshop rather than in a pocket.

Replaceable electrodes

The electrodes connect by cable, and the pH probe uses a BNC connector. Replace a worn probe without replacing the monitor itself. A built-in calibration indicator also signals when it is time to calibrate.

Measurements and readings

  • pH: 0.1 to 14.0 pH
  • EC: 0.0 to 19.9 mS/cm
  • TDS: 0.0 to 19.99 PPT
  • PPM: 0 to 1999 PPM; factory set to the 700 scale
  • Temperature: 0 °C to 50 °C

pH affects whether plants can take up nutrients; outside the suitable range, some elements become unavailable. As a guide, aim for around 5.5 to 6.5 pH in hydroponics and coco, and around 6.0 to 7.0 pH in soil. EC indicates solution strength, or the concentration of dissolved salts, rather than fertiliser quality. Check the PPM scale when comparing readings: the same EC gives different PPM values on the 500 and 700 scales, so EC in mS/cm is the more reliable common reference when using a table based on another scale.

Calibration and probe care

The monitor is factory calibrated and ready for an initial measurement. For ongoing accuracy, calibrate it regularly, about once a month. The pH section has automatic two-point calibration using pH 4 calibration solution and pH 7 calibration solution. The EC section has automatic one-point calibration at EC 1.4, using EC 1.413 calibration solution.

Pack contents and additional equipment

The case contains the handheld monitor, a 9 V battery and a pH electrode. The EC electrode is not included and must be purchased separately to measure conductivity, TDS or PPM. Calibration solutions and KCl storage solution for the pH probe are also needed.

Choosing between H600 versions

H600 Pro is for measuring liquids such as nutrient solution in a tank, prepared watering solution, drainage or well water. For measurements directly in coco, peat or soil, choose H600 Pro Substrate, which has probes suited to soft growing media. Both versions share the same electronics, measurement ranges and calibration method; their probes are intended for different materials.

Technical specifications

  • pH range: 0.1 to 14.0 pH
  • EC range: 0.0 to 19.9 mS/cm
  • TDS range: 0.0 to 19.99 PPT
  • PPM range: 0 to 1999 PPM; factory scale: 700 PPM
  • Temperature range: 0 °C to 50 °C
  • Resolution: pH 0.1 pH, EC 0.1 mS/cm, TDS 0.01 PPT, PPM 10 PPM, temperature 0.1 °C
  • Accuracy, pH: +/-0.1 pH
  • Accuracy, EC, TDS and PPM: +/-2% F.S.
  • Accuracy, temperature: +/-0.5 °C
  • Automatic temperature compensation: 0 to 50 °C
  • Calibration: automatic two-point pH at 4.0 and 7.0 pH; automatic one-point EC at EC 1.413
  • pH electrode connector: BNC
  • Power: 1 x 9 V battery, included; battery status indicator
  • Automatic switch-off: after 8 minutes
  • Monitor protection rating: IP62; electrode protection rating: IP67
  • Dimensions: 210 x 120 x 60 mm; weight: 430 g
  • Warranty: 1 year for the monitor and 6 months for the pH electrode
  • Pack contents: handheld monitor, 9 V battery, pH electrode and shipping case

What to watch out for

  • Keep the glass pH electrode hydrated. Rinse it after each measurement and store it in KCl storage solution between measurements to prevent it from drying out.
  • Use fresh calibration solution. Calibrate with solution from an unopened pack and never pour used solution back into its bottle.

Additional parameters

Category: Measuring Sets
Weight: 0.58 kg
EAN: 8785284957906

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů

Aqua Master Tools (also often searched for as AquaMaster) makes digital measuring devices in the Netherlands for growers: pH metres, EC metres and combined devices. Each combined device measures pH, EC and temperature in nutrient solution or directly in the growing medium, such as the S300 PRO 3.0 for substrate or the H600 Pro Substrate.

Find out more about the brand and its individual models in our article Aqua Master Tools – digital measuring devices from the Netherlands.