Aqua Master Tools combined pH metre P160 PRO 2.0 (pH, EC, PPM, TDS, Temperature)
Code: N51245Related products
Product detailed description
Aqua Master Tools P160 PRO 2.0 measures pH, EC, PPM, TDS and temperature in one pen. Switch between readings at the touch of a button, without manual conversions or a second metre. It is useful for checking nutrient solutions, as well as water in pools, hot tubs and ponds.
Measurements and readings
pH affects whether plants can take up nutrients. As a guide, aim for around 5.5 to 6.5 pH in hydroponic systems and coco, and 6.0 to 7.0 pH in soil. EC indicates solution strength, or the concentration of dissolved salts; it does not indicate fertiliser quality.
The wide PPM range suits strong solutions and runoff. PPM readings use the factory 700 scale, used in Europe and Australia. The same EC reading converts to different PPM values on the 500 and 700 scales, so EC in mS/cm is the more reliable basis for comparison. There is no universal conversion value between EC and PPM.
Calibration and electrode care
Calibrate pH automatically at two points, pH 4.0 and 7.0. EC calibration is manual and works with any EC calibration solution, so you can use the standard you have available. Calibration solutions for initial setup are included in the case. For replacements, choose pH 4, pH 7 or EC 1.413; EC 12.88 is useful for stronger solutions. Calibrate about once a month; the metre reminds you 30 days after the previous calibration.
The replaceable electrode is made for dry storage and does not need to be kept in liquid. Before first use, soak it in water for at least 12 hours, then rinse it after each measurement. When it wears out, replace it with the replacement electrode for P160 PRO rather than buying a new metre. Dry-storage guidance applies to Aqua Master PRO 2.0 pens, not standard glass probes used in monitors.
What comes in the set
The metre arrives calibrated, with batteries and calibration solutions in a sturdy case, so it is ready to measure after unpacking.
- P160 PRO 2.0 combined metre
- Storage and shipping case
- pH 7.00 buffer solution, 25 ml
- pH 4.01 buffer solution, 25 ml
- EC 1.413 calibration solution, 25 ml
- Calibration screwdriver
- 2 AAA batteries
- User guide (NL, EN, DE)
Specifications
- pH range: 0.00 to 14.00 pH
- EC range: 0.00 to 20.00 mS/cm
- TDS range: 0.00 to 14.00 PPT
- PPM range: 0 to 14,000 PPM
- Temperature range: 0 °C to 50 °C
- PPM scale: 700 PPM
- Resolution: pH 0.01 or 0.1 pH; EC 0.01 or 0.1 mS/cm; TDS 0.01 or 0.1 PPT; PPM 10 PPM; temperature 0.1 °C
- pH accuracy: +/-0.1 pH
- EC, TDS and PPM accuracy: +/-2% F.S.
- Temperature accuracy: +/-0.5 °C
- Automatic temperature compensation: 0 °C to 50 °C
- Calibration: automatic two-point pH calibration at 4.0 and 7.0 pH; manual EC calibration with any EC calibration solution
- Electrode: replaceable, dry-storage type; calibration reminder after 30 days
- Power: 2 AAA batteries (included); battery status indicator
- Automatic shut-off: after 8 minutes
- Ingress protection: IP67
- Dimensions: 230 x 43 x 43 mm; weight: 132 g
Choosing the right metre
Choose P160 PRO 2.0 if you need PPM and TDS readings alongside pH and EC, or work with solutions that exceed a few hundred units. Older Aqua Master models such as E60 PRO topped out at 1,999 PPM, so check the scale when comparing readings from another metre.
The case, calibration solutions and screwdriver are included, unlike a pen supplied on its own. If pH and EC are enough, the P110 PRO 2.0 is a simpler, lower-cost option. For pH measurement alone, consider the P50 PRO 2.0. For direct measurement in damp substrate, use a substrate metre such as the S300 PRO 3.0; P160 PRO 2.0 is for measuring solutions.
What to watch out for
- Prepare the electrode before first use. Soak it in water for at least 12 hours, rinse it after each measurement and fit its cap for storage.
- Use dry storage. The electrode does not require liquid storage.
- Do not measure directly in damp substrate. Use a metre designed for substrate measurement.
Additional parameters
| Category: | Measuring Sets |
|---|---|
| Weight: | 0.67 kg |
| EAN: | 8721249602047 |
Discussion
Be the first who will post an article to this item!
Aqua Master Tools (also often searched for as AquaMaster) makes digital measuring devices in the Netherlands for growers: pH metres, EC metres and combined devices. Each combined device measures pH, EC and temperature in nutrient solution or directly in the growing medium, such as the S300 PRO 3.0 for substrate or the H600 Pro Substrate.
Find out more about the brand and its individual models in our article Aqua Master Tools – digital measuring devices from the Netherlands.
