Autopot 1Pot, 4 plant pots with tank 47L BOX
Code: N44167Related products
Product detailed description
Autopot 1Pot BOX is a complete gravity-fed irrigation kit for four plants, supplied with four 15 L pots and a 47 L tank. It needs no electricity, pump or timer, making it a straightforward option for tomatoes, peppers, herbs, strawberries and ornamental plants.
How the irrigation system works
The AQUAvalve5 float valve controls the water supply. Water flows by gravity from the tank through 9 mm hoses to the trays beneath the pots. The valve fills each tray to approximately 20 mm, then closes until the plants have used all the water. This wet-and-dry cycle helps aerate the roots, supports healthy root development and prevents waterlogging. The AQUAvalve5 has a 66% larger inlet than the previous version, reducing the risk of blockages.
Benefits of the 1Pot system
- Automatic operation: Once the tank is full, the system runs independently for several weeks, making it useful when you are away.
- No electricity required: Gravity powers the system, so there are no running costs or pump or timer to fail.
- Reduced water and fertiliser use: The closed system has no runoff, so plants use the supplied water and nutrients. This saves up to 40% of water and fertilisers.
- Expandable setup: Add more pots with the separately available 1Pot Module.
Suitable growing media
Use an airy, free-draining growing medium to support the wet-and-dry cycle. The following 50/50 mixes are suitable:
- Soil and perlite
- Coco and perlite
- Soil and expanded clay
- Coco and expanded clay
- Rockwool and expanded clay
Add a drainage layer of expanded clay or perlite, approximately 2.5 cm deep, to the bottom of each pot.
Setting up the tank and starting the system
Position the 47 L tank at least 150 mm above the highest AQUAvalve5. This height provides the gravity-fed flow. Refill the tank when the water level falls to around one-third, and do not let it run completely dry. After planting, water the plants and allow 7–10 days for them to root before starting the system. One 47 L tank supplies up to 6 planters; for a larger setup, choose a larger tank from the Flexitank range.
Fertilisers for the 1Pot base system
Use mineral fertilisers with the 1Pot base system for straightforward, low-maintenance operation. Organic fertilisers are not recommended because they can settle in and block the narrow 9 mm water lines. Larger 1Pot XL and XXL systems can use organic fertilisers with a water pump in the tank.
Cleaning the AQUAvalve5
Keep the valve and tray clean and free of obstructions. At the end of the season, wash the valve in warm soapy water; an old toothbrush can help with cleaning. Clear limescale from the nozzle with a paper clip or blow through it. Do not clean the nozzle with a drill, as this will damage the valve.
What is included
- 1 × 47 L tank with lid
- 4 × 15 L plant pots
- 4 × 1Pot trays with lids (1Pot tray and lid)
- 4 × AQUAvalve5 valves
- 4 × Root Control Discs to prevent root growth through the base
- 4 × Marix Discs to prevent growing medium from washing out
- 1 × 9 mm golf filter
- 1 × 9 mm tank grommet
- 4 m of 9 mm hose
- 2 × 9 mm cross connectors and 2 × 9 mm T-connectors
- 2 × 9 mm shut-off valves
- Instructions
Specifications
- Number of plant pots: 4
- Pot capacity: 15 L
- Tank capacity: 47 L
- Hose diameter: 9 mm
- Power: gravity-fed, no electricity required
Expansion and accessories
Expand the system with another 1Pot Module (9 mm). You can also purchase a replacement 1Pot tray and lid or a tray cover separately. For a cleaner root ball, use the copper PotSock Square. Browse the full 1Pot range.
Choosing a system size
This BOX serves four plants. Smaller setups and larger options, such as the 1Pot system for 6 planters, are also available in the 1Pot range. The system design stays the same; the number of modules and tank capacity vary.
What to watch out for
- Allow plants to root before starting irrigation. Water them after planting and wait 7–10 days before switching on the system.
- Keep the tank supplied with water. Refill it at around one-third full and do not let it run dry.
- Use mineral fertilisers with the 1Pot base system. Organic fertilisers can settle in and block the 9 mm water lines.
- Do not use a drill to clean the valve nozzle. It will damage the valve.
Additional parameters
| Category: | 1Pot |
|---|---|
| Weight: | 6.42 kg |
| EAN: | 5060151870162 |
Discussion
Be the first who will post an article to this item!
AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.
Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.
For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.
AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.
The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.
For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.
- Growing tips for AutoPot watering systems
- Choosing and using fertilisers for hydroponics
