Autopot Tray2Grow system 111.5x41x9.5 cm
Code: TRAY2GSYSRelated products
Product detailed description
One tray, five growing options
AutoPot Tray2Grow is a fully automated watering system developed and made in the UK. It works by gravity, with no electricity, pumps or timers, and suits seedling propagation, germination, herbs, vegetables and ornamental annuals, indoors or outdoors. The tray measures 111.5 x 41 x 9.5 cm.
Five ways to use the system
- Grow bags: The included capillary spikes pierce the base of each bag, delivering water and nutrients directly to the roots.
- Seedlings and Microgreens: Add the capillary mat to use the tray for propagation. It holds up to four included seed trays or two Microgreens trays.
- Plant pots: Place any number of plastic or fabric planters with drainage holes on the capillary mat. Each plant draws up the water it needs.
- Large fabric planter: For large plants and root vegetables, add the optional 93x33x35 cm fabric planter.
- Grow mats: The system also works with coco or mineral grow mats, watered in the same way as grow bags.
How the AQUAvalve5 controls watering
The patented AQUAvalve5 is at the heart of the system. Once the tray has emptied as plants use the water, the valve opens and refills it to a preset level of around 20 mm, then closes. It opens again only when the tray is empty. Rather than maintaining a constant water level like a float valve, it creates a wet-and-dry cycle that supports healthy roots and saves up to 50% of water and fertiliser. The system runs quietly and independently.
Built-in design features
- Three integrated circular spirit levels help you level the tray accurately.
- Side guide holes accommodate support canes for taller plants.
- Remove the overflow plug outdoors to drain rainwater; leave it in place indoors.
- Self-adhesive copper tape helps deter slugs.
- The copper-layered root control sheet prevents roots from growing through to the valve.
Setup and starting the system
Place the tray on a firm, level surface and check it with the built-in spirit levels. Do not set it on gravel, as the tray can shift. When using plant pots, seed trays or Microgreens trays, soak the capillary mat and root control sheet before use. Loosen the growing medium in each grow bag and perforate the base before placing it in the tray.
For a setup using grow bags and capillary spikes, water the plants by hand first and allow around 7 days for them to root. Then switch the tank on and off intermittently for about three weeks while the plants establish. Other configurations can start as soon as they are assembled.
Fertilising
Tray2Grow delivers both water and fertiliser to the plants. Add liquid or soluble fertiliser to the tank and the system distributes it through the lines. If the growing medium already contains nutrients, use plain water for the first few weeks and introduce fertiliser gradually. Dissolve powdered fertilisers in warm water first.
Before refilling the tank, close the tap and add water and fertiliser. Wait 30-60 minutes for particles to settle, then open the tap.
Tank requirements and water temperature
The tank is not included. Use any sturdy container with a recommended minimum volume of 47 L. A 47 L tank supplies one Tray2Grow for around 14-28 days, depending on plant size and weather. Keep the tank water around 18-21 °C. In hot weather, shade the tank or cover it with a light-coloured cover.
Cleaning the AQUAvalve5
At the end of the season, wash the valve in warm soapy water; an old toothbrush can help. Flush the distribution lines as well. Clear limescale from the nozzle with a paper clip or by blowing through it. Never clean the nozzle with a drill, as this will damage the valve. During continuous use, clean the tank and filter before every third refill.
Pack contents
- 1 Tray2Grow tray with lid
- 1 AQUAvalve5, 2 x 9 mm grommets and 1 m of 9 mm tubing
- 1 16-9 mm Click-Fit filter, 1 9 mm Golf filter, 1 9 mm in-line tap and 1 9 mm Tee
- 3 circular spirit levels, 10 capillary spikes and 10 capillary strips
- 1 capillary mat, 1 root control sheet and 4 seed trays
- 1 6 mm overflow plug and 1 length of copper tape to deter slugs
Accessories and extensions
Add a replacement capillary mat, root control sheet, seed trays or a seed tray lid for germination in humid conditions. For Microgreens, choose the Microgreens tray; for large plants, add the 93x33x35 cm fabric planter. Find the Tray2Grow Tray&Lid and other parts in the Tray2Grow range.
Specifications
- Tray dimensions: 111.5 x 41 x 9.5 cm
- Watering valve: AQUAvalve5
- Recommended minimum tank volume: 47 L
What to watch out for
- Use a firm, level surface. Gravel or soft ground can shift or settle and affect the tray's level.
- Allow grow-bag plants time to root before starting automatic watering. Water them by hand for around 7 days, then switch the tank on and off intermittently for about three weeks.
- Never clean the valve nozzle with a drill. It will damage the valve.
Additional parameters
| Category: | Tray2Grow |
|---|---|
| Weight: | 3.91 kg |
| EAN: | 5060151875488 |
| PFHGX: | Cheap, Best-selling, Recommended, High-quality, Branded, Basic |
| blogpost Hydroponické systémy AutoPot pro úsporný provoz a vysoké výnosy: | /blog/hydroponicke-systemy-autopot-pro-usporny-provoz-a-vysoke-vynosy/ |
| blogpost Hydroponie - co obnáší a jak začít?: | /blog/hyroponie-co-obnasi-a-jak-zacit/ |
Discussion
Be the first who will post an article to this item!
AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.
Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.
For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.
AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.
The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.
For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.
- Growing tips for AutoPot watering systems
- Choosing and using fertilisers for hydroponics
