Autopot XXL50 1Pot, 1 planter without tank

Code: N41515
Not rated
1 379 Kč –4 %
34518 autopot xxl50 1pot 1 kvetinac bez nadrze
1 379 Kč –4 % 1 312 Kč 1 084,30 Kč excl. VAT Measure price:
In stock
Delivery to:
25/11/2026
Autopot XXL50 1Pot, 1 planter without tank is a gravity-fed system for one large plant, supplied with a 50 L FlexiPot and AQUAvalve5. No pump or electricity needed.

Detailed information

Product detailed description

This single-pot AutoPot system waters one large plant through a gravity-fed AQUAvalve5. The tank is not included, making this set suitable for adding another tray to an existing XXL system or connecting a tank chosen to suit your setup. It works indoors or outdoors for herbs, vegetables, mature shrubs and small trees.

Gravity-fed watering

The AQUAvalve5 supplies water to the tray through a 9 mm connection. Once connected to a tank, the valve opens the water supply and fills the tray to a preset level using gravity, without a pump, electricity or timer. It releases no more water until the plant has used what is in the tray. This creates alternating wet and dry periods that encourage strong root growth; the cycle starts again when the tray is empty. The system uses no electricity.

Textile FlexiPot and root development

The round textile FlexiPot has porous walls that air-prune roots. Instead of circling against a solid plastic wall, roots form a dense, branched root ball that takes up nutrients more effectively. The fabric also lets air reach the growing medium and supports vigorous growth. Exposed fabric allows water to evaporate, so using several planters can slightly increase room humidity.

Suitable growing media

Use a free-draining growing medium. These 50/50 mixes are suitable:

  • Soil and perlite
  • Soil and expanded clay
  • Coco and perlite
  • Coco and expanded clay
  • Rockwool and expanded clay

Rinse expanded clay pebbles before use, as some types are not pH-stable. Before placing the planter in the tray, remove growing medium from the base and sides to keep the AQUAvalve5 working correctly.

Tank setup and starting the system

Choose a tank to suit your capacity, or connect the set to an existing system. Position the tank at least 150 mm above the highest AQUAvalve5. Refill it when it is about one-third full and do not let it run dry. After planting, allow 7–10 days for roots to establish before starting the system.

Using fertilisers

Both mineral and organic fertilisers can be supplied through the tank and distribution line. Dry fertilisers such as Biotabs or Florganics can also be mixed directly into the growing medium. For liquid organic fertilisers, add a water pump to the tank and run it for 15 minutes every 2 hours to keep nutrients from settling. Each time the tank empties, flush the line and clean the tank, pump and filter. Mineral fertilisers offer the simplest, maintenance-free operation.

Cleaning the AQUAvalve5

Keep the valve and tray clean and free of obstructions. At the end of the season, wash the valve in warm soapy water; an old toothbrush can help. Clear limescale from the nozzle with a paper clip or by blowing through it. Do not clean the nozzle with a drill, as this will damage the valve.

What is included

  • 1 XXL tray with lid
  • 1 XXL accessories pack, including a textile FlexiPot 50 L, a PotSock Round 50 L, an AQUAvalve5 and a 9 mm grommet
  • 1 6 mm blanking grommet, pre-fitted in the front hole of the tray. Remove it outdoors to let rainwater drain; leave it in place indoors.
  • The 50 L planter fits directly into the XXL tray; no adaptive collar is needed.
  • The tank, filter and tap are not included. Add your own or connect the system to an existing supply.
  • Instructions

Expanding the system

Add another tray using the XXL tray and the 1Pot XXL pack with planter. Replace the planter with a FlexiPot 50 L, or add a copper PotSock Round 50 L to help keep the tray clean and support healthy roots. Browse the 1Pot XXL systems range.

Choosing a size

This set waters one planter, using the largest 1Pot planter available. The next size up is the XXL50 for 2 planters. For a smaller planter with more room around the set, choose the XXL35 variant with a 35 L planter. All models use the same mechanism; the number of trays and capacity differ.

Technical specifications

  • Configuration: 1 planter
  • Planter capacity: 50 L
  • Watering valve: AQUAvalve5
  • Connection: 9 mm
  • Tank: not included

What to watch out for

  • Position the tank correctly. Keep it at least 150 mm above the highest AQUAvalve5, refill it when about one-third full and do not let it run dry.
  • Prepare expanded clay before use. Rinse the pebbles, as some types are not pH-stable.
  • Keep the system clean. Clear growing medium from the tray before setting the planter in place, and never use a drill to clean the valve nozzle.
  • Remove the blanking grommet outdoors. This allows rainwater to drain from the tray; keep it fitted indoors.
  • Liquid organic fertilisers need circulation. Run a water pump for 15 minutes every 2 hours, then flush the line and clean the tank, pump and filter each time the tank empties.

Additional parameters

Category: 1Pot XXL
Weight: 2 kg
EAN: 8595722004280

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů

AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.

Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.

For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.

AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.

The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.

For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.

  • Growing tips for AutoPot watering systems
  • Choosing and using fertilisers for hydroponics