Bluelab pH and EC Combo metre
Code: BLUELABPHECRelated products
Product detailed description
The Bluelab Combo Metre measures pH, electrical conductivity (EC) and temperature in a nutrient solution with one portable instrument. One probe measures pH; the other measures conductivity and temperature. Place the probes in the solution to view the readings on the large backlit display.
Measurements and probe setup
- Measures pH from 0 to 14, EC from 0 to 9.9, CF from 0 to 99, PPM 500 from 0 to 4,950 and PPM 700 from 0 to 6,930.
- Displays temperature from 0 to 50 °C in Celsius or Fahrenheit.
- The pH probe is replaceable and connects through a BNC connector, so you can replace the probe without replacing the metre.
- The conductivity and temperature probe is factory-calibrated and ready to use.
- Two 2 m cables and a suction-cup probe holder make it easier to work beside a reservoir.
Calibration and probe care
Calibrate the pH probe at two points with one button, using pH 4.0 and pH 7.0 solutions. The metre gives a recalibration reminder after 30 days. The conductivity probe needs no calibration; check its accuracy against the EC 2.77 standard.
Keep the glass pH probe in KCl storage solution and do not let it dry out. A replacement Bluelab pH probe (BNC) is available separately. The care kit for pH and EC metres helps with probe maintenance.
Choosing a metre for your setup
The Combo Metre uses two probes in the solution for routine measurements. For an all-in-one pocket pen with Bluetooth, consider the Bluelab OnePen. For measuring pH directly in the substrate, the Bluelab Multimedia pH Metre uses a Leap probe.
EC indicates the strength of the nutrient solution, while pH affects how well plants take up nutrients. Checking both readings helps keep the solution in the ideal range and prevent overfeeding and nutrient lockout.
Technical specifications
- Measurements: pH, EC (conductivity), CF, PPM 500 (TDS), PPM 700 and temperature
- pH range: 0.0–14.0; resolution 0.1; accuracy +/-0.1
- EC range: 0–9.9; resolution 0.1; accuracy +/-0.1 at 25 °C
- CF range: 0–99; accuracy +/-1
- PPM 500 (TDS) range: 0–4,950; accuracy +/-50
- PPM 700 range: 0–6,930; accuracy +/-70
- Temperature range: 0–50 °C; resolution 1°; accuracy +/-1 °C
- Calibration: two-point pH calibration (pH 4.0 and 7.0) with one button; conductivity and temperature probes are factory-calibrated and need no calibration
- Probes: replaceable pH probe with BNC connector; factory-calibrated conductivity and temperature probe; 2 m cables
- Power: 2 AAA alkaline batteries
- Automatic shut-off: after 4 minutes
- Pack contents: metre with probes, pH 4.0 and 7.0 calibration solutions, storage solution and suction-cup probe holder
- Warranty: 5 years for the metre; 6 months for the pH probe
What to watch out for
- Keep the pH probe moist. Store it in KCl solution and do not let it dry out.
- Water resistance is limited. The metre is splash-resistant, not waterproof.
Additional parameters
| Category: | Measuring Devices |
|---|---|
| Weight: | 0.5 kg |
| EAN: | 9421024920036 |
| PFHGX: | Cheap, Best-selling, Recommended, High-quality, Branded, Basic |
| blogpost Jak na správné měření vodivosti (EC)?: | /blog/jak-na-spravne-mereni-vodivosti--ec/ |
| blogpost Jak používat kalibrační roztoky a pH metry?: | /blog/jak-pouzivat-kalibracni-roztoky-a-ph-metry/ |
Discussion
Be the first who will post an article to this item!
