Digital CO2 WiFi monitor, temperature and humidity
Code: 31845Related products
Product detailed description
Monitor indoor or outdoor CO2 levels, temperature and humidity in real time. The NDIR sensors track all three readings, while WiFi connectivity lets you view data through a mobile app.
Live readings and app monitoring
Connect the monitor to the mobile app over WiFi to check readings whenever you need them. The data logger stores up to one week of data. If CO2 rises above the safety limit, the monitor sends an automatic alarm to prompt you to take appropriate action.
Screen and battery
The display shows CO2 concentration, temperature and humidity. It adjusts its brightness to the surrounding light and switches off after 30 seconds without movement to reduce consumption. You can change this setting in the app, where readings remain available in real time. Wave your hand to light up the screen. Low-power operation provides approximately 23 hours of use without recharging.
Portable design
The compact, lightweight monitor is easy to hold and suitable for use at home, school, in the office, car or grow room.
Calibration and setup
- Manual calibration: Switch on the monitor and leave it in an environment with a CO2 concentration of about 400 ppm, outdoors or by an open window, for 5–10 minutes. Press the multifunction button three times at three short intervals. After a few seconds, the device switches off and calibration is complete. Restart it for normal use.
- Automatic calibration: 24 hours after switch-on, the sensor sets itself to the lowest CO2 reading. Allow a period of ventilation within those 24 hours to maintain calibration accuracy.
- Before first use: Charge the monitor for 5 minutes, then calibrate it.
Positioning in a grow room
For best results, place the monitor above the CO2 entry point and below the ventilation inlets and outlets, approximately level with the plant tops.
NDIR sensor technology
NDIR (Non-Dispersive Infrared) sensors provide accurate, stable CO2 measurements and are used in professional CO2 monitors. Special filters allow light at specific wavelengths to pass through. Since gases such as CO2 absorb light at particular wavelengths, the sensor can measure CO2 concentration. Electrochemical and capacitive sensors are also used in CO2 monitors, but are generally less accurate than NDIR sensors.
Technical specifications
- CO2 detection range: 400–5,000 ppm
- CO2 detection accuracy: +/-(50 ppm + 5% of the reading)
- Temperature detection range: 0–50 °C
- Temperature detection accuracy: +/-1 °C
- Humidity detection range: 0–99% RH
- Humidity detection accuracy: +/-5% RH
- Dimensions: 70 x 90 x 35 mm
- Battery capacity: 1,200 mAh
Pack contents
- 1 CO2 monitor
- 1 illustrated user guide
- 1 USB Type-C cable
Additional parameters
| Category: | CO2 Sensors and Metres |
|---|---|
| Weight: | 0.19 kg |
| EAN: | 8594200879501 |
Discussion
Be the first who will post an article to this item!
URBAN growing and URBAN gardening describe cultivating plants and crops in a city. People with a house and garden or courtyard have more space to grow, while those in densely built-up areas often rely on a sunny balcony or terrace. If neither is available, you can still grow herbs at home.
