MTC1 - digital timer thermostat (heating or cooling)
Code: MTC1Related products
Product detailed description
Control heating or cooling equipment according to temperature and time settings. Choose heating or cooling mode for the socket output, then set separate day and night temperatures using the two-program, 24-hour timer. The MTC1 also controls fans for air extraction or intake, underfloor heating and warm-air distribution.
A two-line LCD shows the temperature, time and output status together. The thermostat monitors its inputs, outputs and sensor connection, and signals a fault visually and audibly when needed. Settings are retained after a power interruption, and the digital DALLAS sensor connects by a 1.5 m cable.
Applications
Use it in homes, workplaces, warehouses, workshops, halls, greenhouses, garages, boiler rooms, cellars, botanical gardens, animal-keeping areas and other spaces.
Operation and installation
- Select heating or cooling mode, with a normally open or normally closed contact.
- Set two temperature programmes across 24 hours, such as separate settings for day and night.
- Set the temperature from 0 to 80°C and hysteresis from 1 to 10°C.
- The cable-mounted sensor can measure temperature in a different space from the thermostat or inside an air duct. For room measurement, position it about 1.5 m above the floor where air circulates well, away from heat emitters.
- Connect the thermostat to the mains using its 3 m power lead and plug; connect the controlled equipment to the socket on the unit. Wall-mounting brackets and fixing materials are included for surface installation.
- For a 1°C hysteresis and a 20°C target in heating mode, the thermostat switches off at 21°C and switches on again at 20°C. In cooling mode, it switches off at 19°C and switches on again at 20°C.
- Sensor cable length, switching or regulated power, and the value range can be adjusted on request. Contact us info@malapa.cz or add your requirements to the order notes at checkout.
Benefits
Settings are retained for up to 35 years, while the clock has a 100-hour backup. The thermostat offers quick setting changes and precise measurement, with low power consumption and steady temperature control without fluctuations. This helps reduce mechanical and thermal stress on mechanical components. A switched-off appliance consumes no electricity. Sensor communication uses safe voltage.
Technical specifications
- Power supply: 230 V AC, 50 Hz
- Maximum resistive load: 3,000 W (13 A)
- Maximum inductive load: 460 W (2 A)
- Temperature sensor: digital, calibrated by DALLAS
- Sensor cable length: 1.5 m
- Sensor dimensions: 10 mm diameter x 60 mm
- Display: two-line LCD
- Controls: 3 buttons (+, -, SET)
- Programmes: 2 per 24 hours
- Output: heating/cooling (NO/NC)
- Temperature range: 0 to 100°C
- Sensor operating temperature: 0 to 80°C
- Temperature hysteresis: 1 to 10°C
- Temperature tolerance: +/-0.25°C
- Time tolerance: +/-2 minutes per month
- Time backup: 100-hour accumulator
- Data backup: 35 years
- Protection: thermal and electronic; fuse-protected
- Menu language: Czech; German, English or Spanish available on request
- Power lead with plug: 3 m
- Mounting: wall or surface, with brackets
- Weight: 3,170 g
- Dimensions: length 170 mm, width 120 mm, height 85 mm
- Operating temperature: -20 to 70°C
- Operating humidity: 0 to 90% RH, non-condensing
- Storage temperature: 0 to 45°C
- Ingress protection: IP44
- Enclosure: ABS
- RoHS compliant
What to watch out for
- Store between 0 and 45°C. Keep the thermostat within this temperature range during storage.
For more information about thermostats, see Wikipedia.cz.
Additional parameters
| Category: | Thermostats |
|---|---|
| Weight: | 2 kg |
| EAN: | HMTC1 |
| Connection: | 1x 230V socket |
| Outputs: | 1x |
| PFHGX: | Cheap, Best-selling, Recommended, High-quality, Branded, Basic |
| Speed control: | temperatures |
Discussion
Be the first who will post an article to this item!
Malapa is a wholly Czech company that has been active in the electronics market since 1999. It develops, manufactures and sells electronic equipment.
Malapa products are used in installations where reliability and a long lifespan are essential.
