Proguard Defender DXB Mini with BPI, for 23 m2
Code: N42224Related products
Product detailed description
This active air purifier covers approximately 23 m2 in rooms with a ceiling height of 3–3.6 m. It reduces surface and airborne moulds, fungi, bacteria, viruses and other harmful pathogens, and operates around the clock. For areas smaller than 15 m2, use a plug-in timer rather than running the unit continuously.
How the PCO and BPI process works
The sanitation process combines photocatalytic oxidation (PCO) and bipolar ionisation (BPI). PCO uses energy to activate a catalyst, converting moisture into dry hydrogen peroxide and other disinfecting elements that continuously treat the space. BPI creates plasma with a very high concentration of positive and negative charges, which destroys pathogens including moulds, fungi, viruses and bacteria. It also helps clean the air by causing particles to clump together and fall to the floor.
Installation and placement
- Install the unit near the air intake and away from the extract point in the grow room.
- Keep it approximately 1 m or more from a fan to ensure the disinfecting elements disperse gently and correctly.
- Mount it on a wall or suspend it from the ceiling. Point the air outlet downwards, with the filters at the top on the left and right.
- Keep the unit away from water and do not install it near lighting.
- Installation takes only a few minutes.
Maintenance
Replace the air filters every 3–4 months, or as needed, to keep the inside of the unit clean. The interval depends on the environment; in clean grow rooms, replacement is usually needed about once every three months. Disconnect the unit from the mains, remove the cover, slide out the filter and insert a new one.
Replace the PCO BPI air-cleaning kit every 12 months to maintain optimal performance. UV radiation degrades over time and the cell collects contaminants. Replace it by following the instructions in the user manual. Without annual replacement, the unit becomes ineffective.
Safety and plant impact
The unit has been tested and verified by recognised laboratories worldwide for safety and effectiveness in reducing moulds, fungi, bacteria, viruses and other harmful pathogens that threaten cultivation. Its organic process is safe for occupied spaces and does not create unwanted or harmful chemicals. It is safe for people, animals and plants, and does not affect plant characteristics such as taste, aroma or terpene content.
Specifications
- Coverage: 23 m2
- Unit weight: 1.4 kg
- Dimensions (H x L x D): 26x23.5x7.6 cm
- Supply voltage / power consumption: 100–240 VAC / 15 W
- Operating voltage / current: 24 VDC / 0.77 A
- Energy consumption: operating power 14 W–22 W
- Warranty: 2 years
What to watch out for
- Use a timer in spaces smaller than 15 m2. The unit should not run continuously in these smaller areas.
- Keep the unit away from water and lighting. Neither should come into contact with the purifier.
- Replace the PCO BPI kit every 12 months. UV degradation and contaminants in the cell make the unit ineffective if the kit is not replaced annually.
Additional parameters
| Category: | AiroDoctor Air Purifiers |
|---|---|
| Weight: | 2.15 kg |
| EAN: | 8594200878696 |
Discussion
Be the first who will post an article to this item!
