Fans RAM
Product sorting
List of products
Clip-on fan RAM 15 cm 15 W 2 speeds keeps air moving around plants. Its sturdy clip supports vertical or horizontal mounting, with airflow up to 200 m³/h.
Circulating wall-mounted fan RAM Heavy Duty - 45 cm delivers airflow for grow rooms, greenhouses, homes and offices. It has three speeds, oscillation and metal blades, with wall...
Oscillating Fan with Clip RAM, 18cm, 20w, 2 speeds is a black circulating fan with two mounting clips, a quiet motor and a 1.4 m power cable.
Circulating fan RAM floor-standing, diameter 30 cm has three speeds, a protective grille and manual controls. It runs quietly and rotates around its own axis for airflow in...
RAM Inline Fan 250 mm - 1080 m3/h suits rigid or flexible ducting and runs quietly. Install it vertically or horizontally; airflow is 1080 m3/h.
Fan RAM Inline Fan 100 mm - 275 m3/h moves air through rigid or flexible ducting and supports vertical or horizontal installation. Its airflow is 275 m3/h.
RAM circulating floor fan, diameter 40 cm features three speeds and a protective grille. Its metal body and blades suit smaller and medium-sized rooms.
Pedestal fan RAM 40 cm, 3 speeds has a 40 cm diameter, adjustable 111–125 cm height, oscillation and a finger-safe mesh grille. Quiet, powerful motor and plug-and-play setup.
Listing controls
How to choose a fan
Airflow (m³/h) in relation to the room volume and the duct diameter are key. The air in a tent should be replaced roughly every 1–3 minutes. Multiply the tent volume (width × depth × height in metres) by approximately 60 to get an indicative airflow requirement in m³/h.
| Diameter | Indicative airflow | Typical use |
|---|---|---|
| 125 mm | ~220–400 m³/h | Tent up to ~100×100 cm |
| 150–160 mm | ~400–800 m³/h | Larger tent / small room |
| 200–250 mm | ~800–1100 m³/h | Grow room |
If you connect a carbon filter after the fan, allow for extra airflow capacity (the filter creates resistance). It is worth controlling the fan speed with a controller. Also place a circulating fan inside the tent to maintain airflow between the plants.
What you’ll find in our fan range
- Intake/extract
- Circulating fans
- Clip fans
- Pedestal fans
- Floor fans
- Fan controllers
- Prima Klima fans
- Vents fans
Pair them with ventilation ducting, carbon filters and silencers.
Brands available
Over 500 products from brands such as Prima Klima, Ruck (Can-Fan), Systemair, RAM, Rhino, Vents, Torin and AC Infinity.
Frequently asked questions
What airflow rating do I need?
Start with the tent volume: multiply the width × depth × height in metres by approximately 60 to get an indicative airflow in m³/h for replacing the air every minute. Allow extra capacity if you connect a carbon filter after the fan, as it creates resistance and reduces airflow.
What is the difference between an extraction fan and a circulating fan?
An extraction (duct) fan removes warm, humid air from the tent and brings in fresh air — controlling temperature, humidity and odours. A circulating fan (clip or pedestal) does not exchange the air; it only moves it around inside, which strengthens stems and helps prevent mould. You need both.
Can I control the fan speed?
Yes. Fan speed can be controlled with a speed controller or a thermostat/controller according to temperature and humidity. Lower speeds mean less noise and power consumption; climate-based control is the most efficient option.
What fan diameter should I choose?
Match the diameter to the carbon filter and ducting — the most common sizes are 125, 150/160 or 200 mm. 125 mm is suitable for smaller tents, while 150–250 mm suits a larger tent or room. Using the same diameter throughout the system simplifies installation and reduces losses.
Most items are in stock and dispatched as quickly as possible. If you have a question, contact us or visit our physical shop.
