AC Infinity CLOUDLINE PRO T8, Quiet Inline Fan System with Temperature Humidity VPD Controller, 200 mm
Code: AI-CLT8Related products
Product detailed description
Ventilation with temperature, humidity and VPD control
AC Infinity CLOUDLINE PRO T8 is an inline fan system for growers who need precise control of the climate in larger grow tents, rooms with several plants or hydroponic spaces. Its airflow is 1371 m3/h, and the included Controller 69 Pro adjusts fan speed in response to changing conditions.
Automatic control and app connection
The fan connects directly to the controller's UIS port using its control cable. CLOUDLINE is UIS-native, so no adapter is needed. Set automatic triggers for temperature, humidity or VPD (Vapor Pressure Deficit), with dynamic fan speeds that respond to current conditions. A minimum speed can also be set to maintain continuous air circulation. The controller calculates VPD from measured temperature and humidity.
Connect the Controller 69 Pro to the AC Infinity app over WiFi or Bluetooth for remote control, historical temperature, humidity and VPD graphs, data export and automation settings. The app also supports alerts. As part of the UIS platform, the controller can independently operate up to four compatible devices, including other CLOUDLINE fans, CLOUDRAY circulation fans and IONBOARD LED lighting.
EC motor and fan construction
The EC motor uses PWM (pulse-width modulation) control for smooth, quiet operation at low speeds. It produces less unnecessary heat and noise than conventional fans with AC motors. Mixed-flow construction and stator blades provide a static pressure of 746 Pa to help overcome resistance from a carbon filter and ducting.
Double ball bearings give the motor a lifespan of up to 67,000 hours and allow installation in any orientation. The unit has an IP44 rating for resistance to dust and splashing water in demanding growing environments.
What is included
- 1 × CLOUDLINE PRO T8 inline fan
- 1 × CONTROLLER 69 PRO smart controller
- 1 × sensor probe
- 2 × hose clamps
- 2 × hanging straps
- 1 × male-to-male UIS cable, 3.05 m
- 6 × cable holders
- 1 × self-adhesive cable tie pads
- 4 × hook-and-loop straps
- 4 × wall plugs
- 4 × screws for mounting the fan
- 2 × wood screws for wall-mounting the controller
- 2 × screws for the controller plate
A carbon filter is not included.
Technical specifications
- Connection diameter: Ø 200 mm
- Airflow: 1371 m³/h
- Noise level: 39 dBA
- Static pressure: 746 Pa
- Motor: PWM-controlled EC motor, mixed-flow design
- Control: CONTROLLER 69 PRO, with temperature, humidity and VPD triggers
- Power consumption: 78 W average, 180 W maximum
- Current: 2.3 A
- Voltage: 100–240 V AC
- Protection rating: IP-44
- Bearings: double ball bearings
- Installation: horizontal or vertical
- Fan dimensions: 216 × 302 × 234 mm
- Controller 69 PRO dimensions: 132 × 74 × 27 mm
- Cable lengths: 3.05 m to the controller, 2.44 m power cable, 3.66 m sensor probe
Matching the filter and ducting
Match the fan, filter and ducting to the same 200 mm diameter. The AC Infinity DCF8 carbon filter has a maximum flow rate of 1308 m3/h, slightly below the fan's 1371 m3/h. This is the only one of the five CLOUDLINE diameters where the filter's maximum flow rate is lower than the fan's, so the fan provides the additional capacity. Filter resistance also reduces the actual airflow through the complete setup.
- AC Infinity DCF8 carbon filter (200 mm) – reduces odours.
- Flexible four-layer ducting, 200 mm – connects the fan to the filter and exhaust.
- Pre-filter for 200 mm carbon filter (2 pcs) – extends the lifespan of the carbon media.
Additional parameters
| Category: | AC Infinity Fans |
|---|---|
| EAN: | 819137020276 |
| Flange (mm): | 200 |
Discussion
Be the first who will post an article to this item!
