AutoPot FlexiPot XL, 1 plant pot with tank 47L (Aquavalve5)
Code: N40973Related products
Product detailed description
AutoPot FlexiPot XL with a 47 l tank for one plant
This complete set combines a 1Pot XL module with a 20 l FlexiPot fabric planter, a 47 l tank and all the connection accessories you need to get started. It provides low-maintenance watering for herbs, vegetables, mature shrubs and trees, indoors or outdoors.
Gravity-fed watering with AQUAvalve5
Each planter has its own AQUAvalve5 valve and 9 mm supply line. Connected to the tank, the valve lets water flow into the tray until it reaches a preset level. Gravity does the work, so there is no pump, electricity or timer. The valve holds back the next supply until the plant has used the water in the tray. This wet-and-dry cycle encourages strong root growth; the process starts again when the tray is empty. The system uses no electricity and avoids wasting water.
The 20 l FlexiPot fabric planter
The breathable 20 l FlexiPot encourages a dense, fibrous root ball. When a root tip reaches the porous fabric, air pruning stops it at the wall instead of letting it circle around the inside of a plastic pot. The resulting root system takes up moisture and nutrients more effectively, helping you grow a larger plant in a smaller volume. The fabric contains no BPA or lead and has no off-gassing or leaching. Its firm base helps keep the plant upright, while the porous material allows air into the root zone.
Exposed fabric releases moisture through evaporation. Using several planters can slightly raise room humidity, so provide ventilation.
Recommended growing media
Use a free-draining growing medium in the FlexiPot. These 50/50 mixes work well:
- 50% soil and 50% perlite
- 50% soil and 50% expanded clay
- 50% coir and 50% perlite
- 50% coir and 50% expanded clay
- 50% Rockwool and 50% expanded clay
Rinse expanded clay pebbles before use, as some types are not pH-stable. Remove growing medium from the base and sides of the planter before placing it in the tray. Keep the fabric clear of the AQUAvalve5 valve, then fit the lid over the valve.
Positioning the tank and starting the system
Place the 47 l tank at least 150 mm above the highest AQUAvalve5 valve. A Garland plastic stool can serve as a stand. Top up the tank when the water level falls to around one-third and never let it run completely dry.
Plant and water your plants, allowing excess water to drain away from the tray. Leave them to root for 7–10 days before starting the system. This gives the roots time to establish so they can draw water from the tray. The tank lets you leave the plants for several days between visits.
Using mineral and organic fertilisers
Mineral and organic fertilisers can be supplied through the tank and distribution lines. Mix dry fertilisers such as Biotabs or Florganics directly into the growing medium; this suits the FlexiPot well.
For liquid organic fertilisers, add a water pump to the tank and run it for 15 minutes every 2 hours to keep nutrients from settling. Each time the tank empties, flush the lines and clean the tank, pump and filter. Mineral fertilisers provide the simplest, low-maintenance operation.
Valve and planter care
Keep the AQUAvalve5 valve and tray clean and free of obstructions. At the end of the season, wash the valve in warm soapy water; an old toothbrush can help. Clear limescale from the nozzle with a paper clip or by blowing through it. Do not clean the nozzle with a drill, as this will damage the valve.
The FlexiPot is reusable. After emptying it, let it dry, then shake out dust and fine roots or brush them away. Sterilise it by washing it in a machine or in a bath with a peroxide solution. A copper PotSock Round XL on the base of the planter helps stop roots growing into the valve. If one component fails, you do not need to replace the whole system.
What is included
- 1 × 47 l plastic tank with lid (47 l tank with lid)
- 1 × 9 mm golf filter
- 1 × XL tray and lid
- 1 × 20 l FlexiPot
- 1 × 9 mm inline tap
- 1 × 1Pot XL watering kit for one planter
- Instructions
Distribution lines and tubing
This set uses 9 mm tubing with the AQUAvalve5 system:
- 9 mm tubing: 9 mm outer diameter / 7 mm inner diameter
- 16 mm tubing: 16 mm outer diameter / 13 mm inner diameter
For larger setups, run a 16 mm main line from the tank and connect individual branches using a 16/9 mm filter reducer.
Expanding the system
Add more growing positions whenever you need them with a 1Pot XL module, or combine a 1Pot XL tray and lid with a 1Pot XL kit with AQUAvalve5. Add a replacement planter with a 20 l FlexiPot, or find individual parts in the accessory box. Many planters can connect to one tank. Browse the 1Pot XL and FlexiPot systems or the full range of AutoPot systems.
Choosing a set size
This set waters one planter and includes a 47 l tank. If you already have a tank and distribution line, choose the FlexiPot XL for one planter without a tank. For more plants, choose the set for two planters with a 47 l tank or four planters with a 47 l tank. The system itself stays the same; the number of trays and tank volume vary.
Additional parameters
| Category: | 1Pot XL |
|---|---|
| Weight: | 2.45 kg |
| EAN: | 5060151871909 |
Discussion
Be the first who will post an article to this item!
AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.
Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.
For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.
AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.
The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.
For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.
- Growing tips for AutoPot watering systems
- Choosing and using fertilisers for hydroponics
