Autopot FlexiPot XL, 2 plant pots with tank 47 l (Aquavalve5)
Code: N41518Related products
Product detailed description
AutoPot FlexiPot XL for two plants
This complete set combines two 20 l FlexiPot fabric planters with a 47 l tank and all the connection accessories needed to get started. It is suited to balconies and small grow tents, and works for herbs, vegetables, mature shrubs and trees, indoors or outdoors.
Gravity-fed watering means there is no need for a pump, electricity or timer. The modular system can be expanded at any time, and if a component wears out, you can replace that part rather than the whole system.
Gravity-fed watering with AQUAvalve5
Each planter has its own AQUAvalve5 valve connected by 9 mm hose. Once connected to the tank, the valve lets water flow into the tray until it reaches a preset level. It then stops the supply until the plant has used the water in the tray. This creates alternating wet and dry cycles that encourage strong root growth; the process repeats when the tray is empty. The system uses no electricity and avoids wasting water.
20 l FlexiPot fabric planters
The breathable fabric planter encourages air pruning: when a root tip reaches the porous wall, it is exposed to air rather than continuing to circle the inside of a plastic pot. The plant develops a dense, fibrous root ball that takes up water and nutrients more effectively, helping you grow a larger plant in a smaller volume. The material is free from BPA and lead, with no off-gassing or leaching. Unlike standard fabric planters, the FlexiPot has a firm base that keeps the plant upright. Its porous fabric also aerates the root zone.
Because the exposed fabric allows water to evaporate, several planters can slightly increase room humidity. Ensure there is ventilation.
Suitable growing media
Use a free-draining growing medium in the FlexiPot. Suitable mixes use a 50% / 50% ratio:
- 50% soil and 50% perlite
- 50% soil and 50% expanded clay
- 50% coco and 50% perlite
- 50% coco and 50% expanded clay
- 50% Rockwool and 50% expanded clay
Rinse expanded clay before use, as some types are not pH-stable. Before placing a planter in its tray, clear any growing medium from the base and sides. Keep the fabric clear of the AQUAvalve5 valve, then fit the lid over the valve.
Tank positioning and start-up
Position the 47 l tank at least 150 mm above the highest AQUAvalve5. A Garland plastic stool can be used as a stand. Refill the tank when the water level falls to around one-third, and never let it run completely dry. Plant up and water the plants, allowing excess water to drain outside the tray. Leave them to root for 7–10 days before starting the system; established roots can then draw water from the tray. The tank can keep the plants supplied for several days without attention.
Mineral and organic fertilisers
Mineral and organic fertilisers can be fed through the tank and distribution system. Dry fertilisers for mixing into soil, such as Biotabs or Florganics, can be blended directly into the growing medium and are well suited to the FlexiPot.
For liquid organic fertilisers, add a water pump to the tank and run it for 15 minutes every 2 hours to keep nutrients from settling. Each time the tank is emptied, flush the distribution line and clean the tank, pump and filter. Mineral fertilisers provide the simplest, maintenance-free operation.
Valve and planter care
Keep the AQUAvalve5 and tray clean and free of obstructions. At the end of the season, wash the valve in warm, soapy water; an old toothbrush is useful for cleaning it. Clear limescale from the nozzle with a paper clip or by blowing through it. Never clean the nozzle with a drill, as this will damage the valve.
The FlexiPot is reusable. After emptying it, let it dry, then shake or brush off dust and fine roots. Sterilise it by washing it in a washing machine or in a bath with a peroxide solution. A copper PotSock Round XL on the base of the planter helps prevent roots from growing into the valve. A faulty component does not mean the whole system needs replacing.
What is included
- 2 x 20 l fabric planters, FlexiPot 20 l
- 2 x trays with lids, 1Pot XL tray & lid
- 2 x irrigation kits for two plant pots
- 1 x 47 l tank with lid (47 l tank with lid)
- 2 x 9 mm tap
- 1 x golf filter
- 1 m of 9 mm hose
- Instructions
Hoses and distribution lines
This set uses the 9 mm distribution system for the AQUAvalve5 generation:
- 9 mm hose: 9 mm outer diameter / 7 mm inner diameter
- 16 mm hose: 16 mm outer diameter / 13 mm inner diameter
For larger systems, a 16 mm main line runs from the tank, with branches connected using a 16/9 mm reducer with filter.
Expanding the system
Add more growing positions with a 1Pot XL module, or use a separate 1Pot XL tray & lid and 1Pot XL kit with AQUAvalve5. Add a replacement planter with a FlexiPot 20 l, or find spare parts in the accessory box. Multiple planters can connect to one tank. Browse the 1Pot XL and FlexiPot systems range or the full selection of AutoPot systems.
Choosing a set size
This set includes two planters and a 47 l tank. If you already have a tank and want to expand, choose the FlexiPot XL for two plant pots without a tank. For one plant, choose the set with one plant pot and a 47 l tank. For a full grow tent, choose the set with four plant pots and a 47 l tank; the tank remains 47 l, with additional trays.
What to watch out for
- Keep the tank above the highest valve. It must sit at least 150 mm higher for gravity-fed operation.
- Do not let the tank run dry. Refill when the water level falls to around one-third.
- Allow plants to root before starting irrigation. Water them first and leave them for 7–10 days before starting the system.
- Keep fabric clear of the valve. Remove growing medium from the planter before placing it in the tray.
- Do not use a drill to clean the nozzle. It will damage the valve.
- Provide ventilation around multiple planters. Evaporation from the exposed fabric can slightly increase room humidity.
Additional parameters
| Category: | 1Pot XL |
|---|---|
| Weight: | 3.1 kg |
| EAN: | 8595722004228 |
Discussion
Be the first who will post an article to this item!
AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.
Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.
For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.
AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.
The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.
For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.
- Growing tips for AutoPot watering systems
- Choosing and using fertilisers for hydroponics
