Autopot FlexiPot XL, 4 plant pots without tank (Aquavalve5)
Code: N41519Related products
Product detailed description
This AutoPot FlexiPot XL set connects four growing sites to one irrigation line, with the tank chosen separately. It combines a 1Pot XL module with four 20 L FlexiPot fabric planters. Choose a tank size to suit how long the system should run between refills, or connect it to an existing XL line. It suits herbs, vegetables, shrubs and trees in indoor or outdoor growing spaces.
The modular system runs on gravity, so it needs no pump, electricity or timer. If a component wears out, replace that part rather than the whole system.
Gravity-fed watering
Each planter has its own AQUAvalve5 valve. Once connected to a tank, the valve lets water into the tray up to a preset level. It then stops the flow until the plant has used the water in the tray. This wet-and-dry cycle encourages strong root growth, and starts again when the tray is empty. The system uses no electricity and avoids wasting water.
20 L FlexiPot fabric planters
The breathable FlexiPot fabric encourages air pruning: when root tips reach the porous wall, exposure to air stops them growing further in that direction. Rather than circling the inside of a plastic pot, the roots form a dense, fibrous root ball that takes up water and nutrients more effectively. This lets a larger plant grow in a smaller volume. The fabric is BPA- and lead-free, with no off-gassing or leaching. Unlike standard fabric planters, FlexiPot has a firm base to help keep the plant upright. Its porous fabric also oxygenates the root zone.
Exposed fabric allows water to evaporate. Several planters can slightly increase room humidity, so provide ventilation.
Suitable growing media
Use a free-draining growing medium in each FlexiPot. These 50% / 50% mixes work well:
- 50% soil and 50% perlite
- 50% soil and 50% expanded clay
- 50% coir and 50% perlite
- 50% coir and 50% expanded clay
- 50% Rockwool and 50% expanded clay
Rinse expanded clay pebbles before use, as some types are not pH-stable. Before placing a planter in its tray, remove growing medium from its base and sides. Keep the fabric clear of the AQUAvalve5, then fit the lid over the valve.
Tank position and system start-up
A tank is not included. Connect the set to an existing XL line or choose a separate tank, such as a 47 L tank with lid or a Flexitank. Position the tank at least 150 mm above the highest AQUAvalve5. Refill it when it is around one-third full and never let it run dry.
Plant up and water the plants, letting excess water drain outside the trays. Allow them to root for 7-10 days before starting the system.
Mineral and organic fertilisers
Mineral and organic fertilisers can be added through the tank and irrigation line. Mix dry fertilisers for soil, such as Biotabs or Florganics, directly into the growing medium; this suits the FlexiPot system well.
For liquid organic fertilisers, add a water pump to the tank and run it for 15 minutes every 2 hours to keep nutrients from settling. Whenever the tank empties, flush the line and clean the tank, pump and filter. Mineral fertilisers provide the simplest, maintenance-free operation.
Valve and planter care
Keep the AQUAvalve5 and tray clean and free of obstructions. At the end of the season, wash the valve in warm, soapy water; an old toothbrush is useful. Clear limescale from the nozzle with a paper clip or by blowing through it. Never clean the nozzle with a drill, as this will damage the valve.
FlexiPot planters can be reused. After emptying, leave one to dry, then shake out dust and fine roots or brush them away. Sterilise it in a washing machine or in a bath of peroxide solution. A copper PotSock Round XL on the base helps stop roots growing into the valve. A fault in one component does not require replacing the entire system.
What is included
- 4 x 20 L fabric FlexiPot planters
- 4 x tray and lid
- 4 x irrigation pack
- 2 x tap
- 1 m hose
- Instructions
Lines and hoses
The set uses the AQUAvalve5 generation of 9 mm distribution. The 9 mm hose has a 9 mm outer diameter and a 7 mm inner diameter; the 16 mm hose has a 16 mm outer diameter and a 13 mm inner diameter. For larger systems, run a 16 mm main line from the tank and connect the individual branches with a 16/9 mm reducer with filter.
Expand the system and add accessories
The modular layout lets you add more growing sites at any time. Choose a 1Pot XL module, or add a separate 1Pot XL tray and lid with a 1Pot XL pack with AQUAvalve5. Replace a planter with a FlexiPot 20 L, or find spare parts in the accessory box. Multiple planters can connect to one tank. Browse the 1Pot XL and FlexiPot systems or the full range of AutoPot systems.
Choose the right size
This version serves four planters and comes without a tank. For a set that includes a tank, choose the FlexiPot XL for 4 plant pots with a 47 L tank. Smaller options include 2 plant pots without a tank and 1 plant pot without a tank. The system body is the same; the number of trays and whether a tank is included vary.
Additional parameters
| Category: | 1Pot XL |
|---|---|
| Weight: | 2.76 kg |
| EAN: | 8595722004235 |
Discussion
Be the first who will post an article to this item!
AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.
Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.
For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.
AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.
The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.
For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.
- Growing tips for AutoPot watering systems
- Choosing and using fertilisers for hydroponics
