Autopot FlexiPot XL, 2 pots without a tank (Aquavalve5)

Code: N40974
Not rated
2 259 Kč –11 %
34461 autopot flexipot xl 2 kvetinace bez nadrze aquavalve5
2 259 Kč –11 % 1 994 Kč 1 647,93 Kč excl. VAT Measure price:
In stock
Delivery to:
25/11/2026
Autopot FlexiPot XL, 2 pots without a tank (Aquavalve5) includes two 20 L fabric pots and gravity-fed watering. The 9 mm system runs without a pump, electricity or timer.

Detailed information

Product detailed description

AutoPot FlexiPot XL connects two fabric pots to one watering line, with a tank chosen separately to suit your setup. Built around the 1Pot XL module and 20 L FlexiPot pots, it can connect to an existing XL system or a tank of your choice. Its compact, portable design helps reduce shipping costs and makes storage easier. Use it for herbs, vegetables, mature shrubs and trees, indoors or outdoors.

Gravity-fed watering with AQUAvalve5

Each pot has its own AQUAvalve5 valve and 9 mm connection. Once connected to a tank, the valve lets water fill the plant saucer to a preset level using gravity alone, with no pump, electricity or timer. It then closes the supply until the plant has used the water in the saucer. This wet-and-dry cycle encourages strong root growth; once the saucer is empty, the cycle starts again. The system uses no electricity and avoids wasting water.

Air-pruning in a sturdy fabric pot

The breathable FlexiPot 20 L has porous fabric walls. When a root tip reaches the fabric, exposure to air prunes it, encouraging a dense, fibrous root ball instead of roots circling the inside of a plastic pot. The resulting root system takes up water and nutrients more effectively, helping you grow a larger plant in a smaller volume of medium. The fabric contains no BPA or lead and does not off-gas or leach. Unlike standard fabric pots, FlexiPot has a firm base to keep the plant upright, while the porous sides aerate the root zone. The exposed fabric also allows water to evaporate, so several pots may slightly increase room humidity; provide ventilation.

Growing media and setup

Use a free-draining growing medium. These 50/50 mixes work well:

  • 50% soil and 50% perlite
  • 50% soil and 50% expanded clay
  • 50% coco and 50% perlite
  • 50% coco and 50% expanded clay
  • 50% Rockwool and 50% expanded clay

Rinse expanded clay before use, as some types are not pH-stable. Before placing a pot in its saucer, remove growing medium from the base and sides, and make sure the fabric does not touch the AQUAvalve5. Then fit the lid over the valve.

Tank position and first watering

A tank is not included. Connect the system to an existing XL layout or choose a tank to suit how long you want it to run between refills, such as this 47 L tank with lid or a Flexitank. Position the tank at least 150 mm above the highest AQUAvalve5. Refill it when it reaches about one-third full and never let it run completely dry. Plant up and water the pots, allowing excess water to drain away from the saucers. Leave the plants to root for 7–10 days before starting the system.

Using fertilisers

Both mineral and organic fertilisers can be supplied through the tank and watering line. Dry fertilisers for soil, such as Biotabs or Florganics, can be mixed directly into the growing medium, which suits the FlexiPot system well.

For liquid organic fertilisers, add a water pump to the tank and run it for 15 minutes every 2 hours to keep nutrients from settling. Whenever you empty the tank, flush the line and clean the tank, pump and filter. Mineral fertilisers offer the simplest, maintenance-free operation.

Cleaning and care

Keep the AQUAvalve5 and saucer clean and clear of obstructions. At the end of the season, wash the valve in warm soapy water; an old toothbrush can help. Clear limescale from the nozzle with a paperclip or by blowing through it. Never clean the nozzle with a drill, as this will damage the valve.

FlexiPot is reusable. After emptying it, let it dry, then shake or brush off dust and fine roots. Sterilise it by washing it in a washing machine or in a bath with a peroxide solution. A copper PotSock Round XL on the base helps prevent roots growing into the valve. If one component fails, you do not need to replace the whole system.

What comes in the pack

Distribution lines and tubing

The system uses 9 mm tubing for the AQUAvalve5 generation:

  • 9 mm tubing: 9 mm outside diameter / 7 mm inside diameter
  • 16 mm tubing: 16 mm outside diameter / 13 mm inside diameter

For larger layouts, a 16 mm main line runs from the tank, with individual branches connected using a 16/9 mm reducer with filter.

Modular expansion and accessories

Add more growing positions at any time with a 1Pot XL module, a separate 1Pot XL tray and lid, or a 1Pot XL kit with AQUAvalve5. Add a replacement pot with a FlexiPot 20 L, or find replacement parts in the accessories box. Multiple pots can connect to one tank. Browse the 1Pot XL and FlexiPot systems or the full range of AutoPot systems.

Choosing a system size

This version serves two pots and comes without a tank. For a system supplied with a tank, choose the FlexiPot XL for two pots with a 47 L tank. For one pot, choose the single-pot version without a tank; for a larger layout, choose the four-pot version without a tank. The system body is the same; the number of saucers and whether a tank is included vary.

Specifications

  • Pot capacity: 20 L each
  • Watering valve: AQUAvalve5
  • Distribution connection: 9 mm
  • Tank: not included

What to watch out for

  • Keep fabric clear of the valve. Contact between the pot and AQUAvalve5 can interfere with the valve.
  • Do not let the tank run dry. Refill it at about one-third full to keep the system supplied.
  • Do not use a drill on the valve nozzle. It will damage the valve.

Additional parameters

Category: 1Pot XL
Weight: 1.26 kg
EAN: 8595722004211

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů

AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.

Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.

For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.

AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.

The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.

For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.

  • Growing tips for AutoPot watering systems
  • Choosing and using fertilisers for hydroponics