Autopot XXL35 1Pot, 1 planter without tank
Code: N41511Related products
Product detailed description
Gravity-fed watering for one large plant
This AutoPot system waters one large plant in a 35 L FlexiPot using the AQUAvalve5. It suits herbs, vegetables, mature shrubs and trees, indoors or outdoors. The 35 L version uses less space and growing medium than the 50 L model, while its adaptive collar lets the smaller planter fit the shared XXL tray. No tank is included, making this set suitable for expanding an existing XXL system or choosing a tank to match the required capacity and layout.
How the watering system works
The AQUAvalve5 connects to a 9 mm supply line. Once connected to a tank, it opens the water supply and fills the tray to a preset level using gravity alone, with no pump, electricity or timer. The valve stops the next supply of water until the plant has used the water in the tray. This creates a wet-and-dry cycle that encourages strong root growth; the process repeats when the tray is empty. The system uses no electricity.
Textile FlexiPot and root growth
The round textile FlexiPot has porous walls that air-prune roots. Rather than circling around the sides of a plastic pot, roots form a dense, branching root ball that takes up nutrients more effectively. The fabric also allows air into the growing medium and supports vigorous growth. Exposed fabric allows water to evaporate, so using several planters can slightly increase room humidity.
Suitable growing media
Use a free-draining growing medium in the XXL system. Suitable mixes include the following, in a 50% / 50% ratio:
- Soil and perlite
- Soil and expanded clay
- Coco and perlite
- Coco and expanded clay
- Rockwool and expanded clay
Rinse expanded clay before use, as some types are not pH-stable. Remove growing medium from the base and sides of the planter before placing it in the tray to keep the AQUAvalve5 working correctly.
Tank setup and starting the system
Connect a suitable tank to the system and position it at least 150 mm above the highest AQUAvalve5. Refill it when it is around one-third full and do not allow it to run dry. Allow plants to root for 7-10 days before starting the system.
Using fertilisers
Mineral and organic fertilisers can be supplied through the tank and distribution line. Dry fertilisers such as Biotabs or Florganics can also be mixed directly into the growing medium. For liquid organic fertilisers, add a water pump to the tank and run it for 15 minutes every 2 hours to prevent nutrients from settling. Each time the tank is emptied, flush the distribution line and clean the tank, pump and filter. Mineral fertilisers offer the simplest, low-maintenance operation.
Cleaning the AQUAvalve5
Keep the valve and tray clean and clear of obstructions. At the end of the season, wash the valve in warm soapy water; an old toothbrush can help. Remove limescale from the nozzle with a paper clip or by blowing through it. Never clean the nozzle with a drill, as this will damage the valve.
What is included
- 1 x XXL tray with lid
- 1 x XXL accessories pack, including a 35 L textile FlexiPot, a PotSock Round 35 L, an AQUAvalve5 and a 9 mm grommet
- 1 x 6 mm blanking grommet, fitted in the front tray opening. Remove it outdoors to drain rainwater; leave it in place indoors.
- 1 x adaptive collar for the 35 L planter
- Instruction manual
The tank, filter and tap are not included. Connect the system to an existing supply or add these separately.
Expanding the system
Add another planting position with an XXL tray and the 1Pot XXL pack with planter. A replacement planter is available as a 35 L FlexiPot. Add a copper PotSock Round 35 L for a cleaner tray and healthier roots. See the full range of 1Pot XXL systems.
Choosing a system size
This set waters one 35 L planter. For more planting positions, consider the XXL35 for 2 planters or the XXL35 for 4 planters. For more growing medium per plant, choose the XXL50 with a 50 L planter. The system body is the same; the number of trays, planter capacity and tank volume differ.
Adaptive collar fit
The XXL tray is sized for a 50 L planter. The adaptive collar reduces the opening to fit the smaller 35 L FlexiPot. The collar is not used with the 50 L version.
What to watch out for
- Position the tank correctly. It must sit at least 150 mm above the highest AQUAvalve5, and should not be allowed to run dry.
- Let plants root before starting. Wait 7-10 days after planting before activating the system.
- Remove the front grommet outdoors. This allows rainwater to drain; leave it fitted indoors.
- Do not use a drill on the nozzle. Clear limescale with a paper clip or by blowing through it to avoid damaging the valve.
- Clean the system when using liquid organic fertilisers. Flush the line and clean the tank, pump and filter each time the tank is emptied.
- Provide the omitted components. The tank, filter and tap are not included.
Additional parameters
| Category: | 1Pot XXL |
|---|---|
| Weight: | 3 kg |
| EAN: | 8595722004242 |
Discussion
Be the first who will post an article to this item!
AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.
Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.
For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.
AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.
The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.
For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.
- Growing tips for AutoPot watering systems
- Choosing and using fertilisers for hydroponics
