Autopot XXL50 2Pot, 2 plant pots without a tank
Code: N44328Related products
Product detailed description
Two large plants with gravity-fed watering
AutoPot 1Pot XXL50 waters two large plants through AQUAvalve5 valves, without daily attention. Each 50 L planter is the largest in the 1Pot range, giving large shrubs, tomatoes and ornamental trees more room than smaller planters. This version does not include a tank, making it suitable for extending an existing XXL system or choosing a tank to match the required capacity and layout. It works for herbs, vegetables, mature shrubs and trees, indoors or outdoors.
The system uses gravity rather than electricity, pumps or timers, reducing routine work and water use. The tank does not need constant draining, and the distribution lines do not need flushing to prevent fertiliser build-up. Individual components can be replaced as needed, without replacing the entire system.
How the watering system works
Each planter connects to a 9 mm distribution line and is controlled by an AQUAvalve5. Once connected to a tank, the valve opens the water supply and fills the tray to a preset level using gravity alone. It holds back the next supply until the plant has used the water in the tray. This wet-and-dry cycle encourages strong root growth; the process repeats when the tray is empty.
Textile FlexiPots for root development
The XXL system uses round textile FlexiPots. Their porous walls air-prune the roots, encouraging a dense, branched root ball instead of roots circling the sides of a plastic pot. This helps roots take up nutrients, while the porous material also aerates the growing medium and supports vigorous growth. The exposed fabric allows water to evaporate, so using several planters can slightly increase room humidity.
Suitable growing media
Use a free-draining growing medium in the XXL system. These 50/50 mixes are suitable:
- Soil and perlite
- Soil and expanded clay
- Coco and perlite
- Coco and expanded clay
- Rockwool and expanded clay
Rinse expanded clay before use, as some types are not pH-stable. Before placing a planter in its tray, remove growing medium from the tray base and sides so the AQUAvalve5 can work correctly.
Tank setup and start-up
The tank is not included, so this version can be connected to an existing XXL system or paired with a tank of your choice. Position the tank at least 150 mm above the highest AQUAvalve5. Refill it when it is around one-third full and never let it run dry. Allow plants to root for 7–10 days before starting the system.
Using mineral and organic fertilisers
Mineral and organic fertilisers can be supplied through the tank and distribution lines. In the XXL system, dry fertilisers such as Biotabs or Florganics can also be mixed directly into the growing medium.
For liquid organic fertiliser, add a water pump to the tank and run it for 15 minutes every 2 hours to keep nutrients from settling. Whenever the tank is emptied, flush the distribution lines and clean the tank, pump and filter. Mineral fertilisers offer the simplest, maintenance-free operation.
Cleaning the AQUAvalve5
Keep the AQUAvalve5 and tray clean and free from obstructions. At the end of the season, wash the valve in warm soapy water; an old toothbrush can help. Clear limescale from the nozzle with a paper clip or by blowing through it. Never clean the nozzle with a drill, as this will damage the valve.
What is included
- 2 XXL trays with lids
- 2 XXL accessory packs, each including a textile FlexiPot 50 L, a PotSock Round 50 L, an AQUAvalve5 and a 9 mm grommet
- 1 6 mm blanking grommet, fitted in the front hole of a tray. Remove it outdoors to allow rainwater to drain; leave it in place indoors.
- The 50 L planter sits directly in the XXL tray, so no adaptive collar is needed.
- The tank, filter and tap are not included. Add them separately or connect the system to an existing supply.
- Instructions
Expanding the system
Add another tray with an XXL tray and a 1Pot XXL pack with a planter. A replacement planter is available as a FlexiPot 50 L. For a cleaner tray and healthier roots, add a copper PotSock Round 50 L. Browse the full range of 1Pot XXL systems.
Choosing a size
This setup waters two 50 L planters, the largest 1Pot size available. The neighbouring option is the XXL50 for one planter. For a smaller planter and a more compact setup, choose the XXL35 variant with a 35 L planter. The mechanism is the same across the range; the number of trays and planter capacity differ.
What to watch out for
- Keep the tank at least 150 mm above the highest valve. Gravity supplies water to the system.
- Do not let the tank run dry. Refill it when it is around one-third full.
- Never use a drill to clean the AQUAvalve5 nozzle. This will damage the valve.
Technical specifications
- Number of planters: 2
- Planter capacity: 50 L each
- Valve: AQUAvalve5
- Distribution line: 9 mm
- Tank included: No
Additional parameters
| Category: | 1Pot XXL |
|---|---|
| Weight: | 4.1 kg |
| EAN: | 8595722004303 |
Discussion
Be the first who will post an article to this item!
AutoPot self-watering systems have made hydroponic growing easier for years, both indoors and outdoors. They need no electricity or timer: all you need is tap water and a sufficiently large tank or FlexiTank. Gravity takes care of the rest, so daily hand-watering becomes a thing of the past.
Choose a system size to suit its location, whether that is inside a grow tent or in a greenhouse. The British-made automatic watering range offers plenty of choice across its product lines: 1pot, AQUAvalve5 and easy2grow. There is an option for every gardener, and you can quickly expand a system with additional plant pots. Use the growing medium that suits you, whether soil or coco.
For soil growing, pair the system with convenient Biotabs fertiliser tablets. AutoPot passive watering systems also work with other fertilisers.
AutoPot systems combine practical design with efficient, economical operation and straightforward maintenance. You can leave them unattended for several days.
The AQUAValve is at the heart of every AutoPot system. It provides a consistent water supply that responds closely to the plants’ needs. This supports the development of a full, branching root system and helps plants make more efficient use of fertilisers, supporting higher yields. Water stays within the system, helping to reduce waste and lessen its environmental impact.
For individual advice on choosing a model and suitable accessories, contact us at info@growcity.cz.
- Growing tips for AutoPot watering systems
- Choosing and using fertilisers for hydroponics
