Bluelab Combo Metre Plus pH/EC/temperature
Code: N40037Related products
Product detailed description
Bluelab Combo Metre Plus is a portable measuring set for checking pH, conductivity (EC) and temperature with one instrument. Its reinforced Bluelab Leap pH Probe has a strengthened tip for measuring pH in nutrient solution and directly in growing media, coco coir or rockwool.
Benefits of the measuring set
- The reinforced Leap probe measures pH in the root zone, where a standard glass probe intended for nutrient solution cannot reach.
- One instrument measures pH, EC, CF, PPM 500, PPM 700 and temperature. Temperature readings are available in Celsius or Fahrenheit.
- The pH probe connects via a BNC connector and is replaceable, so you can change the probe without replacing the metre.
- The conductivity and temperature probes are calibrated at the factory. Only the pH probe needs calibration, using a single button.
- Automatic switch-off after 4 minutes helps conserve the two AAA alkaline batteries.
Calibration and probe care
Calibrate the pH probe at two points using pH 4.0 and pH 7.0 solutions. If you usually measure above 7.0, use pH 10.0 instead of pH 4.0. The conductivity probe needs no calibration; check its accuracy against the EC 2.77 standard. Store the Leap probe in KCl storage solution and do not let it dry out. Replacement Bluelab Leap pH Probe and a care kit for pH/EC metres are available separately.
Choosing a metre
Choose Combo Metre Plus when you need to measure pH in growing media, coco coir or rockwool as well as in nutrient solution. The standard Bluelab Combo Metre has a conventional glass probe for nutrient solution and suits hydroponic work at the reservoir. The pocket-sized 3-in-1 Bluelab OnePen includes Bluetooth. For pH measurements in growing media without EC, use the Bluelab Multimedia pH Metre. The standard Combo Metre and Combo Metre Plus have the same measuring ranges and accuracy.
Why monitor pH and EC
EC indicates the strength of the nutrient solution, while pH affects nutrient uptake. Monitoring both helps keep the solution within the right range and prevents overfeeding and nutrient lockout.
Technical specifications
- Measurements: pH, EC (conductivity), CF, PPM 500 (TDS), PPM 700 and temperature
- pH range: 0.0–14.0; resolution: 0.1; accuracy: +/-0.1
- EC range: 0–9.9; resolution: 0.1; accuracy: +/-0.1 at 25 °C
- CF range: 0–99; accuracy: +/-1
- PPM 500 (TDS) range: 0–4950; accuracy: +/-50
- PPM 700 range: 0–6930; accuracy: +/-70
- Temperature range: 0–50 °C; resolution: 1°; accuracy: +/-1 °C
- pH probe: Bluelab Leap pH Probe with reinforced tip for direct measurements in growing media; replaceable, BNC connector
- Calibration: two-point pH calibration at pH 4.0 and 7.0, or 10.0, using one button; conductivity and temperature probes are factory-calibrated and need no calibration
- Power: 2x AAA alkaline batteries
- Automatic switch-off: after 4 minutes
- Water resistance: splash-resistant, not waterproof
- Probe cables: 2 m
- Warranty: 5 years for the metre; 6 months for the Leap probe
- Pack contents: metre with conductivity and temperature probes, plus a Leap pH Probe
Additional parameters
| Category: | Measuring Sets |
|---|---|
| Weight: | 0.5 kg |
| EAN: | 9421024920975 |
Discussion
Be the first who will post an article to this item!
