Bluelab Guardian Monitor INLINE Connect Wifi pH/EC/temperature, with in-line probes
Code: N43952Related products
Product detailed description
This in-line monitor measures pH, EC and temperature in the solution flowing through a recirculating or flow-through system. Its probes screw directly into the pipework, so readings come from the moving solution rather than a tank.
In-line monitoring and alerts
The in-line pH probe is built to handle pressure and turbulence in the line. Set upper and lower limits for pH, EC and temperature; the monitor sounds an alarm when a reading moves outside those limits. Built-in Wi-Fi connects to the Edenic app for phone alerts, live readings and measurement history. Adjust the LED display brightness to suit a darker growing space.
Measurement and calibration
The monitor measures pH, electrical conductivity and temperature. EC can also be displayed as CF, PPM 500 or PPM 700. PPM values depend on the scale, so use the same scale as the fertiliser schedule you follow. Calibrate pH at two points using pH 4.0 and pH 7.0 solutions; the EC and temperature probes are calibrated at the factory. Wi-Fi can be switched off, and the unit runs from mains power.
Choosing an in-line or tank monitor
Choose this in-line version when the probes need to be fitted permanently into a recirculating system's pipework. For probes placed in a tank, use the wall-mounted Guardian Monitor Wi-Fi. This monitor measures and triggers alerts but does not dose the solution. For automatic pH dosing, use the pH Controller; the Pro Controller controls pH and nutrients using PeriPod dosing units. The monitor can also be supplemented with a dosing unit.
Probe care and related supplies
Keep the glass pH probe in its KCl storage cap and do not let it dry out. pH calibration uses pH 4 calibration solution and pH 7 calibration solution. When the probe needs replacing, choose the replacement in-line pH probe; a standard submersible probe is not suitable for pipework. pH affects nutrient uptake, and readings outside the suitable range can block uptake. Set target EC using the dosing schedule for your fertilisers.
Specifications
- Installation: In-line probes with 3/4" NPT thread; 1" NPT reducer included
- Measurements: pH, EC (electrical conductivity) and temperature
- pH range: 0.0–14.0
- pH resolution: 0.1
- pH accuracy: +/-0.1
- EC range: 0.0–5.0
- Other EC scales: CF 0–50; PPM 500: 0–2,500; PPM 700: 0–3,500
- Temperature range: 0–50 °C / 32–122 °F
- In-line pH probe: Replaceable, BNC connection; pressure rating 7 bar / 100 psi; KCl storage cap
- Calibration: Two-point pH calibration at 4.0 and 7.0; EC and temperature calibrated at the factory
- Connection: Wi-Fi, Edenic app and measurement history
- Display: LED with adjustable brightness
- Power: 100–240 V mains
- Housing: Water-resistant, not fully waterproof
- Warranty: 2 years for the unit; 6 months for the pH probe
What to watch out for
- Keep the glass pH probe moist. Store it in its KCl cap and do not let it dry out.
- Use an in-line probe in the pipework. A standard submersible pH probe is not suitable for this installation.
- Protect the unit from water. Its housing is water-resistant, not fully waterproof.
Additional parameters
| Category: | Measuring Sets |
|---|---|
| Weight: | 0.91 kg |
| EAN: | 9421024922924 |
Discussion
Be the first who will post an article to this item!
