SANlight STIXX Termination plug (AI5010) seals unused M19 5-PIN DC ports on modular STIXX drivers. Fit one to each unused port before connecting the driver to the mains.
SANlight STIXX Y-Splitter cable, 5 PIN, M19 (AI5002) distributes power in a Y configuration, connecting matching STIXX fixtures to one driver without separate cables.
SANlight STIXX Stand Undercanopy Lighting (stand 2 pcs) (AI5200) positions STIXX lights beneath the canopy or between rows. Tool-free setup; each stand is approximately 30 cm high.
SANlight STIXX Spacer Small (AI5204) maintains defined minimum spacing between STIXX lights. Its 420 x 15 x 5 mm size suits narrow, compact installations.
SANlight STIXX Spacer Medium (AI5205) maintains a defined gap between STIXX lights across the installation. Its 550 x 15 x 5 mm size supports a more open layout.
SANlight STIXX 40 cm extension cable connects STIXX lights, or a light and driver, when they cannot reach directly. It has a double-ended M19 5-PIN connector.
SANlight STIXX extension cable 25 cm bridges a short gap between a driver and light or two closely spaced lights. M19 5-PIN connector for compatible STIXX fixtures.
SANlight STIXX extension cable 150 cm, 5 PIN, M19 (AI5008) reaches from a driver positioned away from the lights. Use it to extend or daisy-chain STIXX lights.
SANlight STIXX Mounting kit (AI5206) secures STIXX 2-60 to 6-150 luminaires for overhead or under-canopy use, with nuts, hanging eyes and screws for installation.
SANlight STIXX 3-Way Y-Splitter 5 PIN, M19 (AI5009) splits one driver output into three branches. Its M19 5-PIN connector links three STIXX lights of the same model.
SANlight Driver Set STIXX 5, 400W (AI5108) powers two STIXX 5-120 lights at full output, with a 4.2 A output current and capacity for additional lights at reduced output.
SANlight Driver Set STIXX 5, 250W (AI5104) powers STIXX 5-120 lights. It runs two 117 W lights at full output and is made exclusively for the STIXX 5 range.
SANlight Driver Set STIXX 4, 910W (AI5114) powers up to five STIXX 4-100 lights from one unit, with a maximum output power of 910 W for larger growing setups.
SANlight Driver Set STIXX 4, 610W (AI5111) powers STIXX 4-100 lights at full output, with an 8 A output current and room to add more lights at reduced power.
SANlight Driver Set STIXX 4, 400W (AI5107) powers up to three STIXX 4-100 lights at full output, with 400 W maximum power for a complete STIXX 4 setup.
SANlight Driver Set STIXX 4, 215W (AI5103) powers STIXX 4-100 lights, with capacity for two fixtures at full power. A suitable supply for a compact grow tent.
SANlight Driver Set STIXX 3/6, 910W (AI5113) powers up to six STIXX 3-80 lights or three STIXX 6-150 lights at full rated output for large installations.
SANlight Driver Set STIXX 3/6, 610W (AI5110) powers up to four STIXX 3-80 lights or three STIXX 6-150 lights from one central driver, with shared dimming.
SANlight Driver Set STIXX 3/6, 320W (AI5106) powers STIXX 3-80 or 6-150 fixtures from one driver. It runs three 3-80 lights at 210 W or two 6-150 at 282 W.
SANlight Driver Set STIXX 3/6, 240W (AI5102) powers up to three STIXX 3-80 fixtures at full power, with a maximum output of 240 W. Fixtures and cables are sold separately.
SANlight Driver Set STIXX 2, 530W (AI5109) powers STIXX 2-60 lights from one driver and supports six lights at full output. Lights are sold separately.
SANlight Driver Set STIXX 2, 270W (AI5105) powers three STIXX 2-60 lights at full output and provides 7 A, with reserve for additional fixtures running at reduced power.
SANlight Driver Set STIXX 2, 160W (AI5100) powers STIXX 2-60 lights, with up to three running at full output. Lights, mains lead and connection cables are sold separately.
Power cable Angled SANlight for EVO/STIXX/Q-Series GEN 2 lights has a 90° Wieland RST20i3 connector that keeps the cable close to the fixture in low tents.
Power cable SANlight for EVO/STIXX/Q-Series GEN2 lights has a straight Wieland RST20i3 connector for compatible lights. EVO models are supplied without a power cable.