SANlight FLEX II GST65 65 W power supply including adapter (AI2023)
Code: N53706Related products
Product detailed description
A 65 W power supply for FLEX II lights
SANlight FLEX II GST65 plugs into a standard mains socket and powers several FLEX II lights at once. It comes with a DC/WDC19 adapter cable, so you can connect the first light straight away. Compared with the smaller GST30, its higher output powers twice as many lights, making it a practical choice for lighting a whole shelf or a small grow tent.
Compatibility and connections
- FLEX II lights: up to 6 FLEX II 10, 3 FLEX II 20 or 2 FLEX II 25 lights, when using the same model.
- WDC19 splitters and extension cables: compatible with the four-way and two-way WDC19 splitters, the T-connector and WDC19 extension cables. The power supply has a WDC19 output.
- The included adapter cable is a WDC19/DC adapter cable; the same type is also available separately.
It is not compatible with EVO/Q-Series lights or cables using Wieland AC, or STIXX products using M19, as these use different connection systems. WDC21 male splitters, intended for 150/240/320 W power supplies, have a different output connection. The SANlight BT-Dimmer and M-Dimmer are also incompatible with FLEX II.
When to choose GST65
Choose GST65 when a GST30 is not enough but a larger driver is not yet needed. It can power, for example, six FLEX II 10 lights. For a larger installation, move up to the 150 W power supply or a higher-output model.
Dimming
GST65 has a fixed output and does not dim FLEX II lights. Their intensity can be adjusted with a driver that supports an external 0-10 V signal; the M-Dimmer and Bluetooth Dimmer do not work with this range.
Technical specifications
- Maximum power: 65 W
- Input voltage: 230 V AC (EU version)
- Maximum current draw: 0.8 A at 230 V AC
- DC output: WDC19 via the included adapter cable
- Minimum load: 1 FLEX II 10
- In the pack: power supply, connector and DC/WDC19 adapter cable
What to watch out for
- Stay within the supported number of lights. The maximum is 6 FLEX II 10, 3 FLEX II 20 or 2 FLEX II 25; do not exceed these limits to run the lights at full power.
- Use a compatible connection system. EVO/Q-Series with Wieland AC, STIXX with M19 and WDC21 male splitters use different connections and are not compatible.
- Use a suitable driver for dimming. GST65 has a fixed output, and SANlight M-Dimmer and Bluetooth Dimmer models do not work with FLEX II.
Additional parameters
| Category: | FLEX II Accessories |
|---|---|
| Weight: | 0.24 kg |
Discussion
Be the first who will post an article to this item!
