SANlight FLEX II power supply 150 W with Wieland connector
Code: N41569Related products
Product detailed description
The SANlight FLEX II 150 W power supply can run a row of FLEX II lights on a shelf or across several levels from one unit. This version has a Wieland connector on the AC side, ready to plug into prepared mains cabling without wiring.
Technical specifications
- Maximum power: 150 W
- Input voltage: 100–240 V AC, multi-range
- Maximum current draw: 0.75 A at 230 V AC
- AC connection: Wieland connector
- DC output: WDC21
- Minimum load: 1 × FLEX II 10
Compatibility
Connect one type of FLEX II light at a time, up to the following quantities:
- 15 × FLEX II 10, 7 × FLEX II 20 or 5 × FLEX II 25
- WDC21 splitters with a male WDC21 connector: four-way and two-way splitters
- WDC19 extension cables between lights
WDC19 splitters with a male connector are not compatible; they are for the GST30 and GST65 power supplies, which have a different output connector. EVO/Q-Series and STIXX lights and cabling use a different system. The Wieland connector on this power supply is for mains connection, not for powering EVO lights. The SANlight BT-Dimmer and M-Dimmer are also incompatible: FLEX II does not have a SANlight dimmer.
Choosing the AC connection
The two versions differ only on the AC side. This version has a ready-fitted Wieland connector for plugging into prepared cabling. The version without an AC connector has loose mains wires for fixed wiring. Both versions have the same power and WDC21 DC output.
Light control
SANlight does not make a dimmer for FLEX II, so the lights cannot be dimmed directly with this power supply. Intensity can be adjusted where the driver supports external 0–10 V control; otherwise, the lights run at full power. Choose the power supply and number of lights to set the output.
Additional parameters
| Category: | FLEX II Accessories |
|---|---|
| Weight: | 0.9 kg |
| EAN: | 9120069231571 |
Discussion
Be the first who will post an article to this item!
