SANlight Undercanopy STIXX 3-80 LED 70 W - 191 µmol/s (AA5120)
Code: N52816Related products
Product detailed description
Lighting for the lower canopy
SANlight Undercanopy STIXX 3-80 is a three-module LED fitting that directs light into lower areas of the plants, where overhead lighting has limited reach. Positioned low in the canopy, it increases photosynthetic activity in that zone and helps lower flowers build mass rather than remain in the shade. It delivers 191 µmol/s at 70 W across a full spectrum, with IP68 protection for use in humid conditions.
Technical specifications
- Power consumption: 70 W
- Photon flux (PPF): 191 µmol/s
- Dimensions (L x W x H): 676 x 85 x 16.9 mm
- Weight: 1.03 kg
- Beam angle: 90/135°
- Module efficacy: 3.1 µmol/J, measured at 50% power
- Spectrum: full spectrum, 400-780 nm
- Protection rating: IP68
- Connector: M19 5-PIN
- LM90 lifespan: 53,000 h
- Warranty: 3 years
- Number of modules: 3
- Use: under-canopy / inter-canopy lighting
- Undercanopy stand (N52845): sold separately
- Dimming: via the blue connector on the driver, using an M-Dimmer or Bluetooth Dimmer
Compatibility
Compatible equipment:
- Driver Set STIXX 3/6 (200 / 240 / 320 / 610 / 910 W): powers this fitting. The 3/6 driver range is shared with another model, but each driver must power fittings of one model only.
- STIXX extension cables and splitters (T-Splitter, Y-Splitter), with an M19 5-PIN connector
- STIXX termination plug (AI5010) for unused DC ports on the driver
- SANlight M-Dimmer and Bluetooth Dimmer, connected via the blue port on the driver
- Use fittings of the same model on each driver
- Undercanopy stand (AI5200) and spacers for mounting beneath the canopy
Not compatible:
- Drivers from other STIXX ranges, which have a different output specification
- SANlight STIXX 50, a closed system with its own power supply
- EVO / Q-Series power cables with a Wieland connector, which differs from the M19 connector
- FLEX II cables with a WDC19 connector, which use a different system
Mounting and power supply
Position the under-canopy version low among the plants on an undercanopy stand, sold separately. It can also be fitted using spacers or a mounting kit. Electrically, it is the same fitting as the top-light version, so it requires a Driver Set STIXX 3/6 to operate. The 200-910 W driver range powers two to six 3-80 fittings at full power.
Using under-canopy lighting
This fitting supplements overhead lighting rather than replacing it. The top-light hangs above the plants as the main lighting, while the under-canopy fitting directs light into the lower growth. Choose the number of under-canopy fittings according to canopy density and how far the overhead light penetrates; denser plants can benefit from more lower-mounted fittings. Adjust light intensity with a dimmer on the driver. SANlight also offers ready-made under-canopy sets for continuous area coverage.
Driver capacity for 3-80 fittings
The STIXX 3/6 driver range is shared with the 6-150 model, but each driver must be used with either 3-80 fittings or 6-150 fittings, not a mixture. At full power, the driver capacities are: 200 W for two 3-80 fittings; 240 W or 320 W for three; 610 W for four; and 910 W for six. The driver, cables and under-canopy stand are sold separately.
Additional parameters
| Category: | STIXX lighting |
|---|---|
| Phase: | growth and flowering |
| Power: | 70 |
| Recommended illuminated area (cm): | 80x80 |
Discussion
Be the first who will post an article to this item!
