AC Infinity Advance Grow Tent System 60x60x180 cm, 1-Plant Kit, WiFi-Integrated Controls
Code: AC-PKB22Related products
Product detailed description
A complete grow tent system with WiFi control
This AC Infinity system brings together a grow tent, lighting, extract fan with carbon filter, air-circulation fan, controller and accessories for indoor growing. Its components are matched, so there is no need to work out duct diameters or cable connections. The setup is suited to a small space and has capacity for 1–2 plants.
Automated climate control
The system is managed by the CONTROLLER AI+. It automates the fans and lighting, adjusting their output gradually in response to temperature, humidity or VPD (vapour pressure deficit) rather than switching them abruptly on or off. It learns from previous data to keep the climate from overshooting or falling behind. Choose one of two AI modes in the app, or set up your own automations with trigger values.
WiFi connectivity and the AC Infinity mobile app let you monitor and control conditions in the tent from anywhere in the world. Keep annual plants, herbs or chili peppers under observation and respond to changes in real time.
The kit uses 3 of the controller’s 8 ports. The remaining ports are available for additional UIS devices, such as the HYDRONE 5 dehumidifier or CLOUDFORGE T3 humidifier. You can also connect additional sensors, such as the CO2 and light sensor.
Components for the grow space
- CLOUDLAB 722 grow tent (60x60x180 cm): Made from dense 2000D Oxford fabric with a reflective Mylar lining. The sturdy 22 mm steel frame supports crossbars carrying up to 68 kg.
- IONBOARD S22 LED lighting (115 W): Full-spectrum lighting with Samsung LM301H diodes provides light that simulates natural sunlight and supports growth through each stage. Its efficacy of 2.7 µmol/J combines strong performance with low power consumption.
- Ventilation: The CLOUDLINE A4 (100 mm) inline fan is speed-controlled by the controller. Together with the carbon filter containing Australian charcoal, it extracts heat, humidity and unwanted odours.
- Air circulation: The oscillating CLOUDRAY S6 (Gen 2) clip fan distributes airflow around the tent, strengthens plant stems and helps prevent hot spots.
What is included
The components are selected to save time when putting together a grow setup. The kit contains:
- 1 × CLOUDLAB 722 grow tent, 60 × 60 × 180 cm
- 1 × CONTROLLER AI+
- 1 × CLOUDLINE A4 inline fan, Ø 100 mm, without a separate speed controller; fan speed is controlled by the controller
- 1 × IONBOARD S22 LED board, 115 W
- 1 × CLOUDRAY S6 (Gen 2) oscillating clip fan, Ø 150 mm
- 1 × carbon filter, Ø 100 mm
- 1 × flexible duct, Ø 100 mm, 2.4 m long
- 2 × 19 L fabric pots
- Accessories: 4 hanging straps, 2 adjustable rope hangers, 2 stainless steel duct clamps for Ø 100 mm ducting, 150 cm aluminium tape, 10 hook-and-loop ties, 2 UIS control cables, 180 cm (straight and L-shaped), a 60 × 60 cm tent net with elastic cords, black tie wire with cutter and precision scissors
CLOUDLAB 722 grow tent specifications
- Tent dimensions: 60 x 60 x 180 cm
- Plant capacity: 1–2
- Outer material: Oxford fabric
- Inner material: Mylar reflective film
- Frame material: Steel
- Frame pole diameter: 22 mm
- Crossbar load capacity: up to 68 kg
- Duct openings: 4 × Ø 100 mm, 3 × Ø 150 mm
IONBOARD S22 LED lighting specifications
- Power draw: 115 W
- Coverage: 60 x 60 cm
- Diodes: Samsung LM301H (272 pcs)
- Efficacy: 2.7 µmol/J
- PPFD: 1,098 µmol/m²/s
- Spectrum: 660 nm, 730 nm, 3000 K, 6500 K (full spectrum), dimming timer
- Lifespan: 50,000 hours
CLOUDLINE A4 inline fan specifications
- Flange diameter: 100 mm
- Airflow: approx. 280 m³/h
- Static pressure: 324 Pa
- Noise level: 29 dBA
- Maximum speed: 2800 rpm
- Power draw: 18 W average, 35 W maximum
- Bearings: Dual ball bearings
- Ingress protection: IP-44
CLOUDRAY S6 oscillating clip fan specifications
- Impeller diameter: 150 mm
- Airflow: approx. 553 m³/h
- Noise level: 31 dBA
- Power draw: 11 W
- Oscillation: Automatic, 90°, 55° tilt
- Ingress protection: IP-54
Carbon filter specifications
- Flange diameter: 100 mm
- Maximum airflow: approx. 357 m³/h
- Carbon type: Australian virgin RC412 carbon, 1200+ IAV
- Carbon bed thickness: 38 mm
- Dimensions: 300 × 177 mm
Duct specifications
- Diameter and length: 100 mm, 2.44 m
- Construction: PVC outer layer, aluminium foil inner layer and steel spiral
Choosing a system size
This kit suits a smaller growing area, such as a room or cupboard, and growers looking for automation without having to select each component separately. For 2–4 plants, choose the 60 × 120 × 180 cm system; for 3 plants, choose the 90 × 90 × 180 cm system.
The AC Infinity setups by grow tent size guide covers adding to a system or choosing individual components. The AC Infinity grow tent system guide explains how AC Infinity devices communicate with each other.
Additional parameters
| Category: | AC Infinity Kits |
|---|---|
| EAN: | 819137022836 |
Discussion
Be the first who will post an article to this item!
