AC Infinity AI+ Grow Tent System 90x90x180 cm, 3-plant set
Code: AC-PKB33Related products
Product detailed description
A complete grow system with intelligent control
This AC Infinity set brings the main equipment for indoor growing together in one system, with automation to help manage the growing environment. It suits growers looking to cultivate plants at home, including herbs, chillies and tomatoes.
Connect the equipment to the central controller to monitor and adjust conditions in the tent through the mobile app, including when you are away from the grow space.
Lighting and air movement
The system includes a 260 W full-spectrum IONBOARD S33 LED panel fitted with Samsung LM301H diodes. A quiet CLOUDLINE A6 EC fan handles extraction, while the CLOUDRAY S6 clip fan circulates air. The extraction setup also includes a carbon filter with Australian activated carbon to capture odours from the extracted air.
Automated control and Wi-Fi access
The central CONTROLLER AI+ automates connected equipment. Set dynamic programmes that respond to changes in temperature, humidity or VPD (vapour pressure deficit). Connect the controller to Wi-Fi to manage the growing space through the AC Infinity app, set alarms and notifications, and review historical data in graphs.
CONTROLLER AI+ monitors temperature, humidity and VPD in the tent, then adjusts extraction, air circulation and lighting. Instead of switching equipment abruptly on and off, it changes output gradually and learns from previous data to avoid overshooting or falling behind target conditions. In the AC Infinity app over Wi-Fi, choose one of two AI modes or create custom automations with trigger values.
The set uses 3 of the controller’s 8 ports. The remaining ports are available for additional UIS equipment, such as the HYDRONE 5 dehumidifier or CLOUDFORGE T3 humidifier. The controller also accepts additional sensors, including a CO2 and light sensor.
What is included
- 1 × CLOUDLAB 733 grow tent, 90 × 90 × 180 cm
- 1 × CONTROLLER AI+
- 1 × CLOUDLINE A6 inline fan, Ø 150 mm, without a separate speed controller; fan speed is controlled by the central controller
- 1 × IONBOARD S33 LED panel, 260 W
- 1 × CLOUDRAY S6 (Gen 2) oscillating clip fan, Ø 150 mm
- 1 × carbon filter, Ø 150 mm
- 1 × flexible ducting, Ø 150 mm, 2.4 m long
- 6 × fabric pots, 19 L
- 4 × hanging straps
- 2 × adjustable rope hangers
- 2 × stainless steel duct clamps, Ø 150 mm
- 1 × aluminium adhesive tape, 150 cm
- 10 × hook-and-loop cable ties
- 1 × straight UIS control cable, male-to-male, 180 cm
- 1 × L-shaped UIS control cable, male-to-male, 180 cm
- 1 × 90 × 90 cm trellis net with elastic cords
- 1 × black plant tie wire with integrated cutter
- 1 × precision scissors
CLOUDLAB 733 grow tent specifications
- Dimensions: 90 x 90 x 180 cm
- Outer fabric: Oxford 2000D
- Inner lining: highly reflective Mylar
- Frame material: steel
- Pole diameter: 22 mm
- Crossbar capacity: up to 68 kg
- Duct openings: 4 × Ø 100 mm, 2 × Ø 150 mm, 3 × Ø 200 mm
- Air intake openings: rear and side, 15 × 35 cm
- Recommended capacity: 3 plants
CLOUDLINE A6 quiet EC fan specifications
- Flange diameter: 150 mm
- Airflow: approx. 598 m³/h
- Noise level: 34 dBA
- Static pressure: 394 Pa
- Maximum power consumption: 65 W
- Average consumption: 35 W
- Ingress protection: IP-44
- Bearings: dual ball bearings
- Lifespan: 67,000 hours
IONBOARD S33 LED lighting specifications
- Power consumption: 260 W
- Recommended coverage: 90 x 90 cm
- LED chips: 640 × Samsung LM301H
- Efficacy: 2.7 µmol/J
- PPFD: 1,788 µmol/m²/s
- Spectrum: 660 nm, 730 nm, 3000 K, 6500 K; dimming timer
- Lifespan: 50,000 hours
- Dimensions: 47 x 47 cm
CLOUDRAY S6 oscillating clip fan specifications
- Impeller diameter: 150 mm
- Maximum airflow: approx. 553 m³/h
- Noise level: 31 dBA
- Power consumption: 11 W
- Movement: 90° automatic oscillation, 55° tilt
- Ingress protection: IP-54
- Lifespan: 67,000 hours
CONTROLLER AI+ specifications
- Maximum number of devices: 8, or 32 with splitters; devices connected to one port share a programme
- Temperature programming range: 0 to 60 °C
- Probe cable length: 3.66 m
- Connectivity: Wi-Fi and Bluetooth
- Display: 11.4 cm
- Power consumption: max. 2 W
Carbon filter and ducting specifications
- Filter flange diameter: 150 mm
- Carbon type: Australian Virgin RC412, 1200+ IAV
- Carbon bed thickness: 38 mm
- Maximum recommended airflow: approx. 700 m³/h
- Filter dimensions: 400 × 227 mm
- Ducting length: 2.44 m; PVC outer layer, aluminium foil inner layer and steel spiral
Choosing a system for your space
This set is suited to three plants in a square tent. For a more powerful light and a fan with higher static pressure, consider the AI+ PRO 120 × 120 × 200 cm set, which includes an IONFRAME EVO6 500 W light. For a smaller space, there is the 60 × 120 × 180 cm set.
See the AC Infinity sets by tent size for ideas on adding equipment or assembling a system from individual components. The AC Infinity grow tent system guide explains how the devices communicate with each other.
This oversised product cannot be sent by a standard carrier. It is available for collection from our shop or for pallet delivery.
Additional parameters
| Category: | AC Infinity Kits |
|---|---|
| Weight: | 4000 kg |
| EAN: | 819137022850 |
Discussion
Be the first who will post an article to this item!
