Drip Irrigation Components
Product sorting
List of products
Splitter for pump or air pump - 20 outlets connects to an 8 mm pump line and distributes flow through 20 outlets sized for 5 mm capillary tubing.
Capillary PVC 5 mm, roll 500 m connects 5 mm components. Warm the end before inserting them; the approximately 3.5 mm internal diameter helps couplings hold firmly, even in...
Urban Hydro Grow clip for Drip Cap, 1 pc is a capillary clip whose use is not limited to the Urban Hydro Drip Cap; it can be used beyond that system.
Manifold for 4 capillaries 5 mm with spike and upward-facing barbs splits a capillary line into four 5 mm outlets, with a 5.5 mm spike inlet for thin-walled tubing.
Manifold for 4 capillaries, 5 mm, horizontal connects a 5 mm capillary line to four outlets. Mount it on a spigot to connect it to a distribution hose.
Irrigation spike SPRAY STAKE for pressurised irrigation uses a 5 mm capillary holder to spray all or part of a plant pot's surface, with a flow rate of 17 L per hour.
Spray valve VARI - Rotary nozzle Antelco 360° with flow control is a replacement for Amazon systems and has an adjustable flow rate of up to 123 l/h.
Connector for 5 mm capillary, coupling type for distribution hose connects an irrigation capillary through prepared PE pipe openings. Working pressure: 0.5–1.5 bar.
Irritec End needle H profile 45° - barbed connector is a plastic irrigation needle with a star-shaped cross-section, for connection to 5 mm capillary tubing.
Connector for capillary 5 mm, plug type, set of 10 pcs closes irrigation capillary tubing. It is recommended for operating pressures of 0.5–1.5 bar.
Connector for 5 mm capillary, cross type provides a simple connection or branching point for irrigation capillary in a distribution system. Recommended working pressure: 0.5–1.5...
Irrigation spike ASD with dripper 2.6 l/h connects to a 5 mm capillary and features a fine filter that limits flow to 2.6 L/h, with a recommended operating pressure of 0.5–1.5 bar.
Connector for 5 mm capillary, type L connects irrigation capillary for a straightforward connection or split. Recommended operating pressure: 0.5–1.5 bar.
Irrigation needle 45° Irritec for microcapillary (O 2.8 mm) is a plastic Irritec fitting for connecting 2.8 mm microcapillary at a 45° angle.
Straight capillary needle CNL 4-6 mm (blue) connects a capillary to a pressurised DSC valve. Its straight form and labyrinth suit this connection.
