25 mm components

Bestsellers

Product sorting

44 items total

List of products

61215 5795b927
99 Kč

CONNECTO T - T-piece with internal thread on branch 25x1" x 25 mm connects PE-LD and PE-MD pipework; a green mechanical fitting for joining pipes.

Code: N57362
2818 f2736full
129 Kč

Yellow Flexi hose, diameter 25 mm (1") carries water from a pump to a hydroponic system. Its 3.5 mm wall resists kinking, and flexibility is retained from -20 to +100 °C.

Code: 1444
51699 connecto pe t kus 25 mm
89 Kč

CONNECTO PE T - piece 25 mm is a green mechanical fitting for joining pipes made from low-density polyethylene (PE-LD) or medium-density polyethylene (PE-MD).

Code: N53751
49383 connecto zavitovy dg prechod s vnejsim zavitem typ 25x1
59 Kč

CONNECTO Threaded DG adapter with external thread - type: 25x1" joins PE-LD and PE-MD pipes. Green mechanical fitting for pipe connections, with an external thread.

Code: N51172
46935 aquaking zpetny ventil 1 nerez ocel
309 Kč

Aquaking Check valve 1“, stainless steel is a stainless-steel check valve in a 1-inch size, with its material and connection size clearly identified in the product name.

Code: N50565
46932 aquaking rychlospojka mosazna dil k hadici 25 mm
125 Kč

Aquaking Brass quick connector, part for 25 mm hose. This brass quick connector is for a 25 mm hose; the 25 mm measurement gives the hose size.

Code: N50566
46851 connecto t kus redukovany 25x20x25 mm
115 Kč

CONNECTO T - reduced piece, 25x20x25 mm joins pipes made from low-density polyethylene (PE-LD) and medium-density polyethylene (PE-MD) with a mechanical fitting. Green in colour.

Code: N50517
44379 irritec kulovy ventil 1 vnitrni vnejsi zavit
189 Kč

Irritec Ball valve 1“ female/male thread is a plastic valve for pressurised irrigation systems, with female and male threads and a 25 mm (1″) diameter.

Code: BX-PEBV10IO2
36482 fld filtr 120 micronu 1 zavit
219 Kč

FLD filter, 120 microns, 1´´ thread catches fine mechanical debris in irrigation water. Its 120-micron screen suits small garden systems connected to a well.

Code: N44140
36137 bimex pe redukce 25 mm x 1 zavit vnejsi
64 Kč

Bimex PE reducer 25 mm x 1´´ - male thread is an irrigation fitting for connecting hoses with a 25 mm diameter to a 1-inch external thread.

Code: N44126
35093 irritec easy pripoj vnitrni zavit 25 mm x 1
59 Kč

Irritec Easy connector, female thread, 25 mm x 1″. Made for pressure irrigation, it is easy to install, with a plastic nut that helps prevent the fitting from being pulled out...

Code: BX-PE2507
35090 irritec easy pripoj vnejsi zavit 25 mm x 3 4
60 Kč

Irritec Easy male-thread connector 25 mm x 3/4" for pressurised irrigation systems. Easy components are simple to install, and the plastic nut secures the connector against...

Code: BX-PE2507O
35087 irritec easy pripoj vnejsi zavit 25 mm x 1
44 Kč

Irritec Easy male threaded connector 25 mm x 1“ is for pressurised irrigation. Its plastic nut helps prevent the 25 mm fitting from being pulled out of the hose.

Code: BX-PE2501O
34566 bimex pe t kus 25 mm
139 Kč

Bimex PE T - piece 25 mm is a polyethylene irrigation fitting that forms a T-shaped junction for hoses with a 25 mm diameter in your irrigation system.

Code: 39271
34563 bimex pe redukce 25 mm x 3 4 zavit vnitrni
69 Kč

Bimex PE reducer 25 mm x 3/4´´ - female thread is an irrigation fitting for connecting hoses with a 25 mm diameter to a 3/4´´ female thread.

Code: N41406
34560 bimex pe redukce 25 mm x 3 4 zavit vnejsi
39 Kč

Bimex PE reducer 25 mm x 3/4´´ - male thread adapts irrigation hoses with a 25 mm diameter to a 3/4´´ male thread, connecting two hose sizes for irrigation.

Code: 39270
34557 bimex pe redukce 25 mm x 1 zavit vnitrni
78 Kč

Bimex PE reducer 25 mm x 1´´ - female thread adapts irrigation hoses with a 25 mm diameter to a 1-inch internal thread, forming a PE connection between the two sizes.

Code: 39275
34554 bimex pe l kus 25 mm x 1 zavit vnitrni
119 Kč

Bimex PE L - piece 25 mm x 1" - internal thread is a PE irrigation fitting for 25 mm diameter hoses, forming an L-shaped connection with a 1-inch internal thread.

Code: 39276
34551 bimex pe l kus 25 mm
129 Kč

Bimex PE L - piece 25 mm is a PE irrigation fitting for creating an L-shaped connection between hoses. It connects irrigation hoses with a diameter of 25 mm.

Code: 39272
34548 bimex pe i spojka 25 mm
125 Kč

Bimex PE I connector 25 mm is a straight PE fitting for irrigation hoses with a 25 mm diameter, joining hose sections in a straight line for irrigation systems.

Code: 39273
paska hadice
43 Kč –55 %
19 Kč

Aquaking Hose Clamp 32-50 mm suits hose applications involving higher pressure, with a 9 mm-wide band, 0.7 mm band thickness and a 6 Nm tightening torque.

Code: S2020036
connceto1
29 Kč

Connecto connector with external thread, 25x3/4" is made for irrigation systems. Its 25 mm hose connection and 3/4" external thread connect valves, water filters and more.

Code: GMA53503
191928 1 ventil regulacni prumer 25mm
49 Kč –20 %
39 Kč

PE hose connector, valve type, 25 mm, push-fit combines a regulating valve with a push-fit connection for 25 mm PE hoses, allowing flow through the hose to be adjusted.

Code: GMA5325
26376 1 spojka pe hadice nastrcna 25 mm typ t
49 Kč –40 %
29 Kč

Connector for PE hose, push-fit, 25 mm, type T. This fitting creates a T-shaped connection for PE hose using a push-fit design, with a 25 mm size.

Code: GMA4294
26373 1 spojka pe hadice nastrcna 25 mm typ l
49 Kč –38 %
30 Kč

Push-Fit Connector for PE Hose, 25 mm, Type L joins two PE hoses with a 25 mm diameter, providing a straightforward push-fit connection between them.

Code: GMA4293
4053 HlavniFoto 4055
69 Kč

Reducing compression coupling 25 x 20 mm connects PE pipe with 25 mm and 20 mm diameters, providing a direct fitting between the two pipe sizes.

Code: IR4053
4471 HlavniFoto 4471 (1)
104 Kč

Reducing PE hoses connector type T, 20x25x20 mm, compression splits an irrigation system into several branches through its T-shaped connection.

Code: 96490
zátka
49 Kč –59 %
20 Kč

PE hose connector, plug type, 25 mm, push-fit closes water systems and fits 25 mm hoses. It provides a straightforward way to seal the connection.

Code: 95400
Redukovaná spojka nástrčná 20 x 25 mm Cover
19 Kč

Reducing push-fit coupling 20 x 25 mm connects 20 mm and 25 mm low-pressure PE pipe, creating a reducing connection between the two pipe sizes.

Code: 21843
15335 pruchodka na rezervoar pro 16 mm a 25 mm hadice
79 Kč –12 %
69 Kč

Reservoir grommet for 16 mm and 25 mm hoses fits into a reservoir opening. The set includes a 25 mm seal and a reducer for 16 mm hoses; couplings are not included.

Code: PRUCHOD16
Irritec PP Zátka, vnitřní závit 1“ Cover
29 Kč
Code: BX-PPCAP1I
Irritec PE přípoj hadice 25 mm x ¾“, vnější závit Cover Code: BX-PEHCO2507
Irritec PE přípoj 2-dílný 25x1“, vnitřní závit Cover Code: BX-PE2P2510
e2394705 Code: BX-PEVA25
paska hadice
39 Kč –20 %
31 Kč

Aquaking Hose Clamp 20-32 mm (1“) secures connectors on PE hoses. Suitable for 20 mm and 25 mm distribution hoses, it keeps hose connections firmly fastened.

Code: 1458
Spojka pro vodní filtr, 25mm-16atm. Cover
59 Kč –16 %
49 Kč

Coupling for water filter, 25 mm, compression connects an Irritec water filter to the system’s distribution hose. Use two couplings per filter for installation.

Code: 1447
image (3)
39 Kč

Connector for PE hoses for non-return valve, 25 mm, compression has a straight PE hose connection and an external thread for fitting a non-return valve in a water system.

Code: 1453
Zpětný ventil mosazný 25mm Cover
252 Kč

Brass non-return valve 25 mm fits between the water filter and branching point, preventing water from flowing back into the barrel when the pump stops and maintaining system...

Code: 1452
2825 spojka pe hadice typ zatka 25 mm sverna
99 Kč –20 %
79 Kč

PE hose connector, plug type, 25 mm, compression closes pressurised water systems. Use it to seal a connection securely within a water pressure installation.

Code: 1451
t kus
99 Kč

PE hose connector, T type, 25 mm, compression splits an irrigation system into several branches. Use it to divide watering lines where the layout calls for a T-branch.

Code: 1450
2823 spojka pe hadice typ l 25 mm sverna
99 Kč –16 %
83 Kč

PE hose connector type L, 25 mm, compression is suitable for making a 90-degree branch in a water hose line. Its L-shaped design places the branch at a right angle.

Code: 1449
2822 spojka pe hadice typ i 25 mm sverna
75 Kč –8 %
69 Kč

Connector for PE hose type I, 25 mm, compression joins or connects a distribution hose, linking hose sections within a distribution system.

Code: 1448
Rozvodná PE hadice, 25mm, 16atm, 1m Cover
35 Kč

Distribution PE Hose, 25 mm, 16 atm, 1 m is made from strong, nearly inflexible plastic and is suitable for pressures up to 16 atm. Shape it using PE hose fittings.

Code: 1445

Listing controls

44 items total