SANlight FLEX II power supply 240 W without AC connector
Code: N41579Related products
Product detailed description
The 240 W FLEX II power supply without an AC connector is suited to larger, permanent installations. Its mains side has loose wires for an electrician to connect directly to the electrical supply, making it a practical choice for fixed, multi-tier setups.
Technical specifications
- Maximum power: 240 W
- Input voltage: 100-240 V AC (multi-range)
- Maximum current draw: 1.1 A at 220 V AC
- AC side: loose wires, no connector
- DC output: WDC21
- Minimum load: 1 x FLEX II 10
Compatibility
- FLEX II lights: up to 22 x FLEX II 10, 11 x FLEX II 20 or 9 x FLEX II 25 of the same type. At least one FLEX II 10 is required as the minimum load.
- WDC21 splitters with a male connector: four-way and two-way WDC21 splitters.
- WDC19 extension cables between lights.
This power supply is not compatible with splitters that have a male WDC19 connector, which are intended for the small GST30/GST65 power supplies. Their output connector is different. EVO/Q-Series and STIXX lights and cabling use a different system; the Wieland connector on those power supplies connects to the mains and does not power EVO lights. SANlight BT-Dimmer and M-Dimmer units are also incompatible, as FLEX II does not have a SANlight dimmer.
Choosing the hard-wired version
Choose this version for a permanent electrical installation rather than a socket connection. If you want to connect the power supply to prepared cabling without an electrician, use the version with a fitted Wieland connector. Both versions have the same power output.
Output control
The power supply has a fixed output. Light intensity can be regulated through a driver that supports an external 0-10 V signal; otherwise, the lights run at full power.
Additional parameters
| Category: | FLEX II Accessories |
|---|---|
| Weight: | 0.9 kg |
| EAN: | 9120069231557 |
Discussion
Be the first who will post an article to this item!
