SANlight FLEX II power supply 320W with Wieland connector
Code: N41577Related products
Product detailed description
For larger FLEX II installations
This 320 W power supply runs multiple FLEX II lights from a single unit, making it suitable for larger installations. The AC side comes fitted with a Wieland connector for connecting to the mains wiring.
Compatible light configurations
Connect up to 30 pieces of FLEX II 10, 14 pieces of FLEX II 20 or 12 pieces of FLEX II 25 of the same model. Use a splitter with a WDC21 male connector at the power supply and WDC19 extension cables between the lights. Both the four-way and two-way WDC21 splitter are compatible.
Connection and control
The 320 W version is also available without an AC connector, with loose wires for permanent connection to the electrical system. Both versions have the same power and WDC21 DC output.
FLEX II does not have a SANlight dimmer, and the power supply has a fixed output. Light intensity can be adjusted with a driver that supports external 0-10 V control; otherwise, the lights run at full power.
Technical specifications
- Maximum power: 320 W
- Input voltage: 100-240 V AC, multi-range
- Maximum current draw: 1.5 A at 220 V AC
- AC connection: Wieland connector
- DC output: WDC21
- Minimum load: 1 x FLEX II 20
What to watch out for
- Meet the minimum load. One FLEX II 10 does not draw enough power for this supply; it needs at least one FLEX II 20 to operate correctly.
- Use WDC21 splitters. Splitters with a WDC19 male connector are for the smaller GST30/GST65 power supplies and have the wrong output connection.
- Do not connect EVO/Q-Series or STIXX lights and cables. They use a different system; the Wieland connector is for mains connection, not for powering EVO lights.
- BT-Dimmer and M-Dimmer are not compatible. FLEX II has no SANlight dimmer.
Additional parameters
| Category: | FLEX II Accessories |
|---|---|
| Weight: | 1.4 kg |
| EAN: | 9120069231595 |
Discussion
Be the first who will post an article to this item!
