SANlight FLEX II power supply 320 W without AC connector
Code: N41580Related products
Product detailed description
The 320 W SANlight FLEX II power supply without an AC connector is made for permanent electrical installations. Its mains side has free wires for an electrician to connect directly to the fixed wiring, rather than a plug. This setup suits large, permanent systems where one power supply runs a full FLEX II installation.
Specifications
- Maximum power: 320 W
- Input voltage: 100-240 V AC (multi-range)
- Maximum current draw: 1.5 A at 220 V AC
- AC side: free wires, no connector
- DC output: WDC21
- Minimum load: 1 x FLEX II 20
Compatible lights and connections
- FLEX II lights: 30 x FLEX II 10, 14 x FLEX II 20 or 12 x FLEX II 25
- WDC21 male splitters, matching the power supply's WDC21 output: four-way and two-way WDC21 splitters
- WDC19 extension cables between lights
Choosing the hard-wired version
Choose this version when the power supply will be connected directly to fixed wiring rather than plugged into a socket, typically in a large permanent installation. For a ready-made cable connection, choose the version with a Wieland connector. Both versions have the same power and DC output.
Compatibility limits
- WDC19 male splitters for the small GST30/GST65 power supplies do not fit; they have a different output connector.
- EVO/Q-Series and STIXX lights and cables use a different system. The power supply's Wieland connector is for mains connection, not for powering EVO lights.
- SANlight BT-Dimmer and M-Dimmer are not compatible; FLEX II does not have a SANlight dimmer.
Connecting and dimming
The minimum load is one FLEX II 20; a single FLEX II 10 does not draw enough power from this supply. For multiple lights, use a splitter with a WDC21 male connector and link the lights with WDC19 cables.
This power supply has a fixed output and FLEX II has no SANlight dimmer. Intensity can be adjusted only through a driver that supports an external 0-10 V signal; otherwise, the lights run at full power.
Additional parameters
| Category: | FLEX II Accessories |
|---|---|
| Weight: | 1.4 kg |
| EAN: | 9120069231564 |
Discussion
Be the first who will post an article to this item!
