EC metres, Page 2
Product sorting
List of products
Bluelab pH Controller Wi-fi monitors reservoir pH and doses adjustment solution automatically, with a maximum flow rate of 120 ml/min and adjustable high and low alarms.
Aqua Master Tools H600 Pro (pH, EC, temperature) measures pH, EC, TDS, PPM and temperature in liquids, with interchangeable probes and a 0.1–14.0 pH range.
Bluelab Sample Tube & Fittings lets you measure nutrient solution directly in the tube, with probes in place. For tanks more than 2 m from the control unit.
Bluelab PeriPod M3 doser, 120 ml/min automatically doses nutrients and pH adjusters into the reservoir. Three peristaltic pumps are controlled by the Bluelab Pro Controller.
Milwaukee MC811, pH/EC/Temperature monitor checks watering solution for professional growers, with manual two-point pH and one-point EC calibration plus automatic temperature...
Aqua Master Tools Replacement electrode for EC metre E300 PRO replaces a worn or damaged probe in the older E300 PRO metre. Calibrates automatically at 1.4 EC.
Bluelab pH Probe - Inline replaces the probe that measures pH in pipework. Its 3/4-inch NPT thread and double-junction design support inline installation.
Bluelab EC probe Pro Controller is a factory-calibrated replacement for EC monitoring and dosing control. Fully submersible, with a standard BNC connector and 2 m cable.
Eclipsera EC and TDS metre measures dissolved solids and electrical conductivity in water, with readings from 0 to 9,990 ppm and temperature measurement from 0.1°C to 80°C.
Milwaukee MW101 PRO SOIL, pH metre measures acidity in soil substrates and suits growers, field surveys and food processing. It has a 0.00–14.00 pH range.
AMT Replacement probe for pH metre S300 PRO is a replacement electrode for the S300 PRO3, with a 120 cm cable for measuring pH in damp substrate and liquids.
Aqua Master Tools Replacement electrode for pH metre P50 PRO 2.0 suits P50 PRO and P50 PRO2 metres. Soak it in tap water for 12 hours before installation.
Aqua Master Tools Replacement electrode for combined pH metre P160 PRO 2.0 restores pH, EC, PPM, TDS and temperature measurement. Calibrate it with pH 4, pH 7 and EC 1.413...
Aqua Master Tools Replacement electrode for EC metre E50 PRO 2.0 is a replacement conductivity sensor for E50 PRO metres. Recalibrate after fitting; warranty lasts 6 months.
Aqua Master Tools replacement pH probe for combined pH metre P700 PRO2 fits the pH circuit, uses a BNC connector and carries a 6-month warranty.
Aqua Master Tools replacement EC electrode for combined pH metre P700 PRO2 connects via Large PIN and handles EC, CF and PPM measurement. It has a 6-month warranty.
Aqua Master Tools P700 PRO2, pH and EC/CF/PPM metre and thermometer combines five readings on one large display. The set includes pH and EC electrodes and a 6 V DC adapter.
Milwaukee MC740, automatic EC control (one pump) continuously monitors nutrient solution and doses fertiliser into the tank when EC moves outside the set range. Accuracy is +/-2%.
Milwaukee MI60P, probe/electrode for pH, EC/TDS metre MW804 is a replacement probe for measuring pH, EC/TDS and temperatures with the Milwaukee MW804.
Milwaukee MI59P, electrode for EC metre EC60 is a replaceable spare electrode for the Milwaukee EC60, measuring EC/TDS and temperature during portable metre use.
Milwaukee MA73600 is a replacement pH probe for the Milwaukee pH51 handheld, water-resistant pH metre. Use it for measuring pH in liquids.
Milwaukee MA73076, electrode for EC metre C66 is a replacement part for the portable Milwaukee C66 waterproof, handheld EC metre, for EC measurements.
Milwaukee EC 40 is a waterproof handheld EC metre for hydroponic growing, with automatic temperature compensation and no calibration required. Battery lifespan reaches 3 years.
Garden soil metre for pH, humidity and incident light measures three growing conditions without batteries, helping you check watering needs and plant placement indoors or outdoors.
Milwaukee KIT - pH51 and C66 is a case set of digital pH and EC metres for nutrient solution, with a pH measuring range of 0.0 to 14.0 for quick checks.
Terra Aquatica pH test kit 60 ml measures nutrient solution pH from 4.0 to 8.5. The 60 ml bottle provides up to 1,000 tests and works without batteries.
Terra Aquatica pH test kit 30ml provides straightforward pH checks across a 4.0 to 8.5 range. The kit is suitable for at least 500 tests.
Milwaukee MW804, pH and EC/TDS metre and thermometer measures four solution values at once. Its replaceable Mi60P probe and compact 200x38 mm body suit regular checks.
